PN511 데이터 시트보기 (PDF) - NXP Semiconductors.
부품명
상세내역
제조사
PN511 Datasheet PDF : 22 Pages
| |||
NXP Semiconductors
PN511
Transmission Module
10. Limiting values
Table 13. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Conditions
PVDD
Ptot
TJ
ESDH
Supply voltage
Total power dissipation per package (VBUS
and DVDD in short cut mode)
Junction temperature range
ESD Susceptibility (Human Body model)
1500 Ω, 100 pF;
JESD22-A114-B
ESDM
ESD Susceptibility (Machine model)
0.75 μH, 200 pF;
JESD22-A114-A
ESDC
ESD Susceptibility (Charge Device model) Field induced model;
JESC22-C101-A
11. Package information
The PN511 can be delivered in 2 different packages.
Table 14. Package Information
Package
Remarks
HVQFN32
8-bit parallel interface not supported
HVQFN40
Supports the 8-bit parallel interface
12. Abbreviations
Min
Max Unit
-0.5
+4.0 V
-
200
mW
100
°C
2000 V
200
V
1000 V
Table 15. Abbreviations
Acronym
Description
ASK
Amplitude Shift keying
Initiator
Generates RF field at 13.56 MHz and starts the NFCIP-1 communication.
Loadmodulation Index The load modulation index is defined as the card’s voltage ratio (Vmax - Vmin)/ (Vmax + Vmin)
measured at the card’s coil.
Modulation Index
The modulation index is defined as the voltage ratio (Vmax - Vmin)/ (Vmax + Vmin).
PCD
Proximity Coupling Device. Definition for a Card reader/writer according to the ISO 14443
specification.
PICC
Proximity Cards. Definition for a contactless Smart Card according to the ISO 14443
specification.
PCD → PICC
Communication flow between a PCD and a PICC according to the ISO 14443A/Mifare.
PICC → PCD
Communication flow between a PICC and a PCD according to the ISO 14443A/Mifare.
SAM
Secure Access Module
Target
Responds to initiator command either using load modulation scheme (RF field generated by
Initiator) or using modulation of self generated RF field (no RF field generated by initiator).
082733
Product short data sheet
Rev. 3.3 — 13 June 2007
© NXP B.V. 2007. All rights reserved.
19 of 22
Share Link: 