25P10AV 데이터 시트보기 (PDF) - STMicroelectronics

부품명

상세내역

제조사

25P10AV

1 Mbit, low voltage, Serial Flash memory with 50MHz SPI bus interface

STMicroelectronics 

M25P10-A

Instructions

6.2

Write Disable (WRDI)

The Write Disable (WRDI) instruction (Figure 8) resets the Write Enable Latch (WEL) bit.

The Write Disable (WRDI) instruction is entered by driving Chip Select (S) Low, sending the

instruction code, and then driving Chip Select (S) High.

The Write Enable Latch (WEL) bit is reset under the following conditions:

● Power-up

● Write Disable (WRDI) instruction completion

● Write Status Register (WRSR) instruction completion

● Page Program (PP) instruction completion

● Sector Erase (SE) instruction completion

● Bulk Erase (BE) instruction completion

Figure 8. Write Disable (WRDI) Instruction Sequence

S

01234567

C

Instruction

D

High Impedance

Q

AI03750D

17/49

Share Link: