N28F010-150 데이터 시트보기 (PDF) - Intel
부품명
상세내역
제조사
N28F010-150 Datasheet PDF : 33 Pages
| |||
E
28F010
4.0 ELECTRICAL SPECIFICATIONS
4.1 Absolute Maximum Ratings*
Operating Temperature
During Read ...............................0 °C to +70 °C(1)
During Erase/Program................0 °C to +70 °C(1)
Operating Temperature
During Read ...........................–40 °C to +85 °C(2)
During Erase/Program............–40 °C to +85 °C(2)
Temperature Under Bias............–10 °C to +80 °C(1)
Temperature Under Bias............–50 °C to +95 °C(2)
Storage Temperature.................. –65 °C to +125 °C
Voltage on Any Pin with
Respect to Ground .................. –2.0 V to +7.0 V(3)
Voltage on Pin A9 with
Respect to Ground ............. –2.0 V to +13.5 V(3, 4)
VPP Supply Voltage with
Respect to Ground
During Erase/Program........ –2.0 V to +14.0 V(3, 4)
VCC Supply Voltage with
Respect to Ground .................. –2.0 V to +7.0 V(3)
Output Short Circuit Current..................... 100 mA(5)
NOTICE: This is a production datasheet. The specifications
are subject to change without notice.
*WARNING: Stressing the device beyond the Absolute
Maximum Ratings may cause permanent damage. These
are stress ratings only. Operation beyond the Operating
Conditions is not recommended and extended exposure
beyond the Operating Conditions may affect device
reliability.
NOTES:
1. Operating Temperature is for commercial product as
defined by this specification.
2. Operating Temperature is for extended temperature
products as defined by this specification.
3. Minimum DC input voltage is –0.5 V. During transitions,
inputs may undershoot to –2.0 V for periods less than
20 ns. Maximum DC voltage on output pins is VCC +
0.5 V, which may overshoot to VCC + 2.0 V for periods
less than 20 ns.
4. Maximum DC voltage on A9 or VPP may overshoot to
+14.0 V for periods less than 20 ns.
5. Output shorted for no more than one second. No more
than one output shorted at a time.
6. See AC Testing Input/Output Waveform (Figure 6) and
AC Testing Load Circuit (Figure 7) for testing
characteristics.
4.2 Operating Conditions
Symbol
TA
TA
VCC
VCC
Parameter
Operating Temperature(1)
Operating Temperature(2)
VCC Supply Voltage (10%)(6)
VCC Supply Voltage (5%)(7)
Limits
Min
Max
0
70
–40
+85
4.50
5.50
4.75
5.25
Unit
°C
°C
V
V
4.3 Capacitance
TA = 25 °C, f = 1.0 MHz
Symbol
Parameter
CIN
Address/Control Capacitance
COUT
Output Capacitance
NOTE:
1. Sampled, not 100% tested.
Notes
1
1
Limits
Min
Max
8
12
Unit
pF
pF
Conditions
VIN = 0 V
VOUT = 0 V
18
Share Link: 