M24512-DF 데이터 시트보기 (PDF) - STMicroelectronics

부품명

상세내역

제조사

M24512-DF

512-Kbit serial I²C bus EEPROM

STMicroelectronics 

M24512-W M24512-R M24512-DR M24512-DF

Instructions

5.1.6

Minimizing Write delays by polling on ACK

The maximum Write time (tw) is shown in AC characteristics tables in Section 8: DC and AC

parameters, but the typical time is shorter. To make use of this, a polling sequence can be

used by the bus master.

The sequence, as shown in Figure 9, is:

● Initial condition: a Write cycle is in progress.

● Step 1: the bus master issues a Start condition followed by a device select code (the

first byte of the new instruction).

● Step 2: if the device is busy with the internal Write cycle, no Ack will be returned and

the bus master goes back to Step 1. If the device has terminated the internal Write

cycle, it responds with an Ack, indicating that the device is ready to receive the second

part of the instruction (the first byte of this instruction having been sent during Step 1).

Figure 9. Write cycle polling flowchart using ACK

Write cycle

in progress

Start condition

Device select

with RW = 0

First byte of instruction

with RW = 0 already

decoded by the device

NO ACK

returned

YES

Next

NO

Operation is

addressing the

memory

ReStart

YES

Send Address

and Receive ACK

Stop

NO

YES

StartCondition

Data for the

Write cperation

Device select

with RW = 1

Continue the

Write operation

Continue the

Random Read operation

AI01847ed

1. The seven most significant bits of the Device Select code of a Random Read (bottom right box in the

figure) must be identical to the seven most significant bits of the Device Select code of the Write (polling

instruction in the figure).

Doc ID 16459 Rev 26

19/40

Share Link: