74LCX126FT 데이터 시트보기 (PDF) - Toshiba
부품명
상세내역
제조사
74LCX126FT Datasheet PDF : 10 Pages
| |||
9. Absolute Maximum Ratings (Note)
74LCX126FT
Characteristics
Symbol Note
Rating
Unit
Supply voltage
VCC
-0.5 to 6.5
V
Input voltage
VIN
-0.5 to 6.5
V
Output voltage
VOUT (Note 1)
-0.5 to 6.5
V
(Note 2)
-0.5 to VCC + 0.5
Input diode current
IIK
-50
mA
Output diode current
IOK (Note 3)
±50
mA
Output current
IOUT
±50
mA
Power dissipation
PD (Note 4)
180
mW
VCC/ground current
ICC/IGND
±100
mA
Storage temperature
Tstg
-65 to 150
Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even
destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Note 1: Output in OFF state.
Note 2: High (H) or Low (L) state. IOUT absolute maximum rating must be observed.
Note 3: VOUT < GND, VOUT > VCC
Note 4: 180 mW in the range of Ta = -40 to 85 . From Ta = 85 to 125 a derating factor of -3.25 mW/ shall be
applied until 50 mW.
10. Operating Ranges (Note)
Characteristics
Symbol Note
Rating
Unit
Supply voltage
Input voltage
Output voltage
Output current
Operating temperature
Input rise and fall times
VCC
VIN
VOUT
IOH,IOL
Topr
dt/dv
(Note 1)
(Note 2)
(Note 3)
(Note 4)
(Note 5)
(Note 6)
1.65 to 3.6
1.5 to 3.6
0 to 5.5
0 to 5.5
0 to VCC
±24
±12
-40 to 125
0 to 10
V
V
V
mA
ns/V
Note: The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either VCC or GND.
Note 1: Data retention only.
Note 2: Output in OFF state.
Note 3: High or low state
Note 4: VCC = 3.0 to 3.6 V
Note 5: VCC = 2.7 to 3.0 V
Note 6: VIN = 0.8 to 2.0 V , VCC = 3.0 V
©2016 Toshiba Corporation
3
2016-09-15
Rev.3.0
Share Link: 