MR20H40VDCR 데이터 시트보기 (PDF) - Extech Instruments Corporation.
부품명
상세내역
제조사
MR20H40VDCR Datasheet PDF : 28 Pages
| |||
MR20H40 / MR25H40
ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings
This device contains circuitry to protect the inputs against damage caused by high static voltages or electric
fields. However, it is advised that normal precautions be taken to avoid application of any voltage greater
than maximum rated voltages to these high-impedance (Hi-Z) circuits.
The device also contains protection against external magnetic fields. Precautions should be taken to avoid
application of any magnetic field more intense than the maximum field intensity specified in the maximum
ratings.
Table 6 – Absolute Maximum Ratings
Permanent device damage may occur if absolute maximum ratings are exceeded. Functional operation should be restricted to
recommended operating conditions. Exposure to excessive voltages or magnetic fields could affect device reliability.
Symbol
VDD
VIN
Parameter
Supply voltage 2
Voltage on any pin 2
Conditions
Value
-0.5 to 4.0
-0.5 to VDD + 0.5
Unit
V
V
IOUT
Output current per pin
±20
mA
PD
Package power dissipation 3
0.600
W
Commercial
-45 to 95
°C
TBIAS
Temperature under bias
Industrial
Extended
-45 to 95
°C
-45 to 115
°C
Tstg
TLead
AEC-Q100 Grade 1
Storage Temperature
Lead temperature during solder (3 minute max)
-45 to 135
°C
-55 to 150
°C
260
°C
Hmax_write Maximum magnetic field during write Write
12,000
A/m
Hmax_read
Maximum magnetic field during read or
standby
Read or Standby
12,000
A/m
Notes:
1. All voltages are referenced to VSS. The DC value of VIN must not exceed actual applied VDD by more than 0.5V. The AC value of
VIN must not exceed applied VDD by more than 2V for 10ns with IIN limited to less than 20mA.
2. Power dissipation capability depends on package characteristics and use environment.
Copyright © Everspin Technologies 2014
14
MR20H40 / MR25H40 Revision 11, 8/2014
Share Link: 