Remote Control Encoder
Tel: 886-2-66296288
Fax: 886-2-29174598
URL: http://www.princeton.com.tw
PT2262
Symbol
Min.
Nom.
Max.
A
-
-
0.210
A1
0.150
A2
0.115
0.130
0.195
b
0.014
0.018
0.022
b2
0.045
0.060
0.070
b3
0.03
0.039
0.045
c
0.008
0.010
0.014
c1
0.008
0.010
0.011
D
0.880
0.900
0.920
D1
0.005
-
-
E
0.300
0.310
0.325
E1
0.240
0.250
0.280
e
0.100 BAS.
eA
0.300 BAS.
eB
-
-
0.430
eC
0.000
-
0.600
L
0.115
0.130
0.150
Notes:
1. All dimensioning are in INCHES.
2. Dimensioning and tolerancing per ANSI Y14.5M-1982.
3. Dimension“A”,“A1”and “L” are measured with package seated in JEDEC Seating Plane Gauge
GS-3.
4. “D”, “D1” and “E1” dimensions do not include mold flash or protrusions. Mold flash or protrusions
shall not exceed 0.010 inch.
5. “E” and “eA” measured with the leads constrained to be perpendicular to datum-c- .
6. “eB” and “eC” are measured at the lead tips with the leads unconstrained.
7. “N” is the number of terminal position (N=18).
8. Pointed or rounded lead tips are preferred to ease insertion.
9. “b2” and “b3” maximum dimensions are not include dambar protrusions. Damber protrusions shall
not exceed 0.010 inch (0.25mm)
10. Distance between leads including Damber protrusions to be 0.005 inch minimum.
11. Datum plane -H- coincident with the bottom of lead, where lead exits body.
12. Refer to JEDEC MS-001, Variation AC
JEDEC is the trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION.
PT2262 V3.8
- 16 -
September, 2008