NT7603
Interface to LCD
(1) Character Font and Number of Lines
The NT7603 provides a 5 X 7 dot character font 1-line mode,
a 5 X 10 dot character font 1-line mode and a
5 X 7 dot character font 2-line mode, as shown in the table
below.
Three types of common signals are available as displayed in
the table. The number of lines and the font type can be
selected by the program.
Number of Lines
Character Font
Number of Common Signals Duty Factor
Bias
1
5 X 7 dots + Cursor
8
(or 5 X 8 dots)
1/8
1/4
1
5 X 10 dots + Cursor
11
1/11
1/4
2
5 X 7 dots + Cursor
16
(or 5 X 8 dots)
1/16
1/5
(2) Connection to LCD
The following 4 LCD connection examples show the various combinations between characters and lines.
NT7603 can directly drive the following combinations:
(a) 5 X 8 Font - 16 character X 1 line (1/8 duty cycle, 1/4 bias)
COM1
LCD PANEL
COM8
SEG1
NT7603
SEG80
15
V2.2