STATIC ELECTRICAL CHARACTERISTICS
Characteristics noted under conditions of 3.1 V ≤ VDD ≤ 5.25 V, 8.0 V ≤ VPWR ≤ 16 V, -40°C ≤ TC ≤ 125°C, unless otherwise noted.
Where applicable, typical values reflect the parameter’s approximate average value with VPWR = 13 V, TA = 25°C.
Characteristic
Symbol
Min
Typ
Max
Unit
POWER INPUT
Supply Voltage
Supply Voltage Range Quasi-Functional (Note 7)
Fully Operational
Supply Voltage Range Quasi-Functional (Note 7)
V
VPWR (qf)
5.5
–
8.0
VPWR (fo)
8.0
–
26
VPWR (qf)
26
–
40
Supply Current
All Switches Open, Normal Mode, Tri-State Disabled
IPWR(on)
–
mA
2.0
4.0
Sleep State Supply Current
Scan Timer = 64 ms, Switches Open
IPWR(ss)
40
µA
70
100
Logic Supply Voltage
Logic Supply Current
All Switches Open, Normal Mode
VDD
3.1
–
5.25
V
IDD
mA
–
0.25
0.5
Sleep State Logic Supply Current
Scan Timer = 64 ms, Switches Open
IDD(ss)
µA
–
10
20
SWITCH INPUT
Pulse Wetting Current Switch-to-Battery (Current Sink)
IPulse
12
15
18
mA
Pulse Wetting Current Switch-to-Ground (Current Source)
IPulse
12
16
18
mA
Sustain Current Switch-to-Battery Input (Current Sink)
Isustain
1.8
2.0
2.2
mA
Sustain Current Switch-to-Ground Input (Current Source)
Isustain
1.8
2.0
2.2
mA
Sustain Current Matching Between Channels on Switch-to-Ground Inputs
IMatch
%
ISUS(MAX) - ISUS(MIN) X 100
ISUS(MIN)
–
2.0
4.0
Input Offset Current when Selected as Analog
Input Offset Voltage when Selected as Analog
V(SP&SGinputs) to AMUX Output
Ioffset
Voffset
-2.0
1.4
-10
2.5
2.0
µA
mV
10
Analog Operational Amplifier Output Voltage
Sink 250 µA
VOL
mV
–
10
30
Analog Operational Amplifier Output Voltage
Source 250 µA
VOH
VDD - 0.1
–
V
–
Switch Detection Threshold
Vth
3.70
4.0
4.3
V
Switch Input Voltage Range
Vin
-14
–
40
V
Temperature Monitor (Note 8), (Note 9)
TLIM
155
–
185
°C
Temperature Monitor Hysteresis (Note 9)
TLIM(hys)
5.0
10
15
°C
Notes
7. Device operational. Table parameters may be out of specification.
8. Thermal shutdown of 16 mA pull-up and pull-down current sources only. 2.0 mA current source/sink and all other functions remain active.
9. This parameter is guaranteed by design but is not production tested.
MOTOROLA ANALOG INTEGRATED CIRCUIT DEVICE DATA
33993/D
5