MFRC52201HN1/TRAYBM_10 데이터 시트보기 (PDF) - NXP Semiconductors.

부품명

상세내역

제조사

MFRC52201HN1/TRAYBM_10

Contactless reader IC

NXP Semiconductors. 

NXP Semiconductors

MFRC522

Contactless reader IC

9.3.1.7 ErrorReg register

Error bit register showing the error status of the last command executed.

Table 33. ErrorReg register (address 06h); reset value: 00h bit allocation

Bit

7

6

5

4

3

2

1

Symbol WrErr TempErr reserved BufferOvfl CollErr CRCErr ParityErr

Access R

R

-

R

R

R

R

0

ProtocolErr

R

Table 34. ErrorReg register bit descriptions

Bit Symbol Value Description

7 WrErr

1

data is written into the FIFO buffer by the host during the MFAuthent

command or if data is written into the FIFO buffer by the host during the

time between sending the last bit on the RF interface and receiving the

last bit on the RF interface

6 TempErr[1] 1

internal temperature sensor detects overheating, in which case the

antenna drivers are automatically switched off

5 reserved -

reserved for future use

4 BufferOvfl 1

the host or a MFRC522’s internal state machine (e.g. receiver) tries to

write data to the FIFO buffer even though it is already full

3 CollErr

1

a bit-collision is detected

cleared automatically at receiver start-up phase

only valid during the bitwise anticollision at 106 kBd

always set to logic 0 during communication protocols at 212 kBd,

424 kBd and 848 kBd

2 CRCErr 1

the RxModeReg register’s RxCRCEn bit is set and the CRC calculation

fails

automatically cleared to logic 0 during receiver start-up phase

1 ParityErr 1

parity check failed

automatically cleared during receiver start-up phase

only valid for ISO/IEC 14443 A/MIFARE communication at 106 kBd

0 ProtocolErr 1

set to logic 1 if the SOF is incorrect

automatically cleared during receiver start-up phase

bit is only valid for 106 kBd

during the MFAuthent command, the ProtocolErr bit is set to logic 1 if the

number of bytes received in one data stream is incorrect

[1] Command execution clears all error bits except the TempErr bit. Cannot be set by software.

MFRC522_34

Product data sheet

PUBLIC

All information provided in this document is subject to legal disclaimers.

Rev. 3.4 — 5 March 2010

112134

© NXP B.V. 2010. All rights reserved.

39 of 96

Share Link: