S8740340PT 데이터 시트보기 (PDF) - RF Micro Devices
부품명
상세내역
제조사
S8740340PT Datasheet PDF : 3 Pages
| |||
S8740340PT
Nominal Operating Parameters
Parameter
Specification
Unit
Min
Typ Max
Condition
General Performance
Power Gain
Slope[1]
Flatness of Frequency Response
Input Return Loss
Output Return Loss
Noise Figure
Total Current Consumption (DC)
V+ = 24V; TMB = 30°C; ZS = ZL = 75Ω
34.0
dB f = 50MHz
34.5
35.5
36.5 dB f = 870MHz
0.5
1.5
2.5 dB f = 40MHz to 870MHz
1.0 dB f = 40MHz to 870MHz (peak to valley)
20.0
dB f = 40MHz to 160MHz
17.0
dB f = 160MHz to 870MHz
20.0
dB f = 40MHz to 160MHz
17.0
dB f = 160MHz to 870MHz
2.5
4.0 dB f = 50MHz to 870MHz
280.0 300.0 mA
Distortion Data 40MHz to 750MHz
V+ = 24V; TMB = 30°C; ZS = ZL = 75Ω
CTB
-66
-64 dBc
XMOD
-58
-56 dBc 112 ch. flat; VO = 44dBmV[2]
CSO
-65
-63 dBc
1. The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency.
2. 112 channels, NTSC frequency raster: 55.25MHz to 745.25MHz, +44dBmV flat output level.
Composite Second Order (CSO) - The CSO parameter (both sum and difference products) is defined by the NCTA.
Composite Triple Beat (CTB) - The CTB parameter is defined by the NCTA.
Cross Modulation (XMOD) - Cross modulation (XMOD) is measured at baseband (selective voltmeter method), referenced to 100% modulation of the
carrier being tested.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140303
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 3
Share Link: 