DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

ACPM-7833-TR1 데이터 시트보기 (PDF) - Avago Technologies

부품명
상세내역
제조사
ACPM-7833-TR1
AVAGO
Avago Technologies AVAGO
ACPM-7833-TR1 Datasheet PDF : 20 Pages
First Prev 11 12 13 14 15 16 17 18 19 20
ACPR Test Results using Spectrum Analyzer
REF 42.8 dBm
AT 30 dB
Mkr 836 MHz
35.42 dBm
RBW = 1.0 MHz
RBW = 300 kHz
RBW = 30 kHz
Center 836 MHz
VBW 100 kHz
Span 5.000 MHz
SWP 2.00 sec
Figure 19. Example ACPR measurement using Spectrum Analyzer.
The meaning of 16 dB
The accurate ACPR measurement using Spectrum
Analyzer needs to consider the normalization factor
that is dependent on the Resolution Bandwidth, RBW,
settings. The above figure (measurement shown at
836 MHz for general example) shows a comparison of
the different ACPR measurement results as a function
of various RBW values. As the RBW is reduced, less
power is captured during the measurement and
consequently the channel power is recorded as a
smaller value. For example, if the main channel power
is measured as 28 dBm in a 1.23 MHz bandwidth, its
power spectral density is 28 dBm/1.23 MHz, which can
be normalized to 11.87 dBm/30 kHz. The equation used
to calculate the normalization factor of power spectral
density is:
Normalization Factor =
10log[Normalization BW/Current BW
(Spectrum Analyzer RBW)]
= 10log[1.23X106/30X103]
= 16.13 dB
Since the ACPR in an IS95 system is specified in a
1.23 MHz bandwidth, a channel power that is measured
using a different RBW, can be normalized to reflect the
channel power as if it was measured in a 1.23 MHz
bandwidth. The difference in channel power measured
in 30 kHz bandwidth and the channel power measured
in a 1.23 MHz bandwidth is 16 dB.
ACPM-7833 Demoboard Operation Instructions
1) Module Description
The ACPM-7833 is a fully matched Power Amplifier.
The sample devices are provided on a demonstration
PC Board with SMA connectors for RF inputs and
outputs, and a DC connector for all bias and control
I/O’s. Please refer to Figures 20 through 23 and the Pin
configuration table for I/O descriptions and
connections.
2.2 µF
Vdd2
RF Out
Vdd2
4700 pF
GND
RFout
Vdd1
RFin
GND
4700 pF
RFin
Vdd1
GND
Vcntl
GND
GND
Vbias
4700 pF
Vcntl
4700 pF
Vbias
Figure 20. ACPM-7833 Evaluation Board Schematic and Layout.
16

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]