Printed Circuit Board Materials
Most commercial applications dictate the need to use
inexpensive epoxy glass materials such as FR-4 or G-10.
Unfortunately the losses of this type of material can become
excessive above 2 GHz. As an example, a 0.5 inch long
50 Ω microstripline etched on FR‑4 along with a blocking
capacitor has a measured loss of 0.35 dB at 4 GHz. The 0.35
dB loss adds directly to the noise figure of the MGA-86576.
The use of a low loss PTFE based dielectric material will
preserve the inherent low noise of the MGA‑86576.
Package Dimensions
76 Package
1.02
(0.040)
.51
(0.20)
Part Number Ordering Information
No. of
Part Number
Devices
MGA-86576-TR1
1000
MGA-86576-STRG
100
Container
7" Reel
Strips
1.22
(0.048)
1.78
(0.070)
.53
(0.021)
5.28
(0.208)
0.10
(0.004)
TYPICAL DIMENSIONS ARE IN MILLIMETERS (INCHES).
MGA-86576 Pkg Dimensions
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
vago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.
Data subject to change. Copyright © 2005-2008 Avago Technologies Limited. All rights reserved. Obsoletes 5989-4658EN
AV02-0608EN - April 29, 2008