MBRF2060CT 데이터 시트보기 (PDF) - Motorola => Freescale
부품명
상세내역
제조사
MBRF2060CT Datasheet PDF : 4 Pages
| |||
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MBRF2060CT/D
SWITCHMODE™
Schottky Power Rectifier
The SWITCHMODE Power Rectifier employs the Schottky Barrier principle in
a large area metal–to–silicon power diode. State–of–the–art geometry features
epitaxial construction with oxide passivation and metal overlay contact. Ideally
suited for use as rectifiers in very low–voltage, high–frequency switching power
supplies, free wheeling diodes and polarity protection diodes.
• Highly Stable Oxide Passivated Junction
• Very Low Forward Voltage Drop
• Matched Dual Die Construction
• High Junction Temperature Capability
• High dv/dt Capability
• Excellent Ability to Withstand Reverse Avalanche Energy
Transients
• Guardring for Stress Protection
• Epoxy Meets UL94, VO at 1/8″
• Electrically Isolated. No Isolation Hardware Required.
2
• UL Recognized File #E69369(1)
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 1.9 grams (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes: 260°C Max. for 10
Seconds
• Shipped 50 units per plastic tube
• Marking: B2060
MAXIMUM RATINGS, PER LEG
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
(Rated VR), TC = 133°C
Peak Repetitive Forward Current
(Rated VR, Square Wave, 20 kHz), TC = 133°C
Nonrepetitive Peak Surge Current
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
Peak Repetitive Reverse Surge Current (2.0 µs, 1.0 kHz)
Operating Junction and Storage Temperature
Voltage Rate of Change (Rated VR)
RMS Isolation Voltage (t = 1.0 second, R.H. ≤ 30%, TA = 25°C)(2)
Total Device
Per Figure 3
Per Figure 4(1)
Per Figure 5
THERMAL CHARACTERISTICS, PER LEG
Maximum Thermal Resistance, Junction to Case
Lead Temperature for Soldering Purposes: 1/8″ from Case for 5 Seconds
(1) UL Recognized mounting method is per Figure 4.
(2) Proper strike and creepage distance must be provided.
SWITCHMODE is a trademark of Motorola, Inc.
Preferred devices are Motorola recommended choices for future use and best overall value.
Rev 1
©RMeoctotriofilea,rInDce. 1v9ic96e Data
MBRF2060CT
Motorola Preferred Device
SCHOTTKY BARRIER
RECTIFIER
20 AMPERES
60 VOLTS
1
1
2
3
3
CASE 221D–02
ISOLATED TO–220
Symbol
VRRM
VRWM
VR
IF(AV)
IFRM
IFSM
IRRM
TJ, Tstg
dv/dt
Viso1
Viso2
Viso3
Value
60
10
20
20
150
0.5
– 65 to +150
10000
4500
3500
1500
RθJC
4.0
TL
260
Unit
Volts
Amps
Amps
Amps
Amp
°C
V/µs
Volts
°C/W
°C
1
Share Link: 