74ALVC125BQ 데이터 시트보기 (PDF) - Nexperia B.V. All rights reserved

부품명

상세내역

제조사

74ALVC125BQ

Quad buffer/line driver; 3-state

Nexperia B.V. All rights reserved 

74ALVC125

Quad buffer/line driver; 3-state

Rev. 02 — 10 January 2008

Product data sheet

1. General description

The 74ALVC125 is a quad non-inverting buffer/line driver with 3-state outputs. The 3-state

outputs (nY) are controlled by the output enable input (nOE). A HIGH on the nOE pin

causes the outputs to assume a high-impedance OFF-state.

2. Features

s Wide supply voltage range from 1.65 V to 3.6 V

s 3.6 V tolerant inputs/outputs

s CMOS low power consumption

s Direct interface with TTL levels (2.7 V to 3.6 V)

s Power-down mode

s Latch-up performance exceeds 250 mA

s Complies with JEDEC standards:

x JESD8-7 (1.65 V to 1.95 V)

x JESD8-5 (2.3 V to 2.7 V)

x JESD8B/JESD36 (2.7 V to 3.6 V)

s ESD protection:

x HBM JESD22-A114E exceeds 2000 V

x MM JESD22-A 115-A exceeds 200 V

3. Ordering information

Table 1. Ordering information

Type number Package

Temperature range Name

Description

74ALVC125D −40 °C to +85 °C SO14

plastic small outline package; 14 leads;

body width 3.9 mm

74ALVC125PW −40 °C to +85 °C

TSSOP14 plastic thin shrink small outline package; 14 leads;

body width 4.4 mm

74ALVC125BQ −40 °C to +85 °C

DHVQFN14 plastic dual in-line compatible thermal enhanced very

thin quad flat package; no leads; 14 terminals;

body 2.5 × 3 × 0.85 mm

Version

SOT108-1

SOT402-1

SOT762-1

Share Link: