ISL88705 데이터 시트보기 (PDF) - Renesas Electronics

부품명

상세내역

제조사

ISL88705

µP Supervisor with Watchdog Timer, Power-Fail Comparator, Manual Reset and Adjustable Power-On Reset

Renesas Electronics 

ISL88705, ISL88706, ISL88707, ISL88708, ISL88716, ISL88813

Package Outline Drawing

M8.15

8 LEAD NARROW BODY SMALL OUTLINE PLASTIC PACKAGE

Rev 4, 1/12

INDEX

AREA

1

2

3

TOP VIEW

6.20 (0.244)

5.80 (0.228)

4.00 (0.157)

3.80 (0.150)

DETAIL "A"

1.27 (0.050)

0.40 (0.016)

0.50 (0.20)

0.25 (0.01)

x 45°

8°

0°

0.25 (0.010)

0.19 (0.008)

SIDE VIEW “B”

5.00 (0.197)

4.80 (0.189)

1.27 (0.050)

0.51(0.020)

0.33(0.013)

SIDE VIEW “A

FN8092 Rev 6.00

November 30, 2015

2.20 (0.087)

SEATING PLANE

1.75 (0.069)

1.35 (0.053)

-C-

0.25(0.010)

0.10(0.004)

1

8

0.60 (0.023)

2

7

1.27 (0.050)

3

6

4

5

5.20(0.205)

TYPICAL RECOMMENDED LAND PATTERN

NOTES:

1. Dimensioning and tolerancing per ANSI Y14.5M-1994.

2. Package length does not include mold flash, protrusions or gate burrs.

Mold flash, protrusion and gate burrs shall not exceed 0.15mm (0.006

inch) per side.

3. Package width does not include interlead flash or protrusions. Interlead

flash and protrusions shall not exceed 0.25mm (0.010 inch) per side.

4. The chamfer on the body is optional. If it is not present, a visual index

feature must be located within the crosshatched area.

5. Terminal numbers are shown for reference only.

6. The lead width as measured 0.36mm (0.014 inch) or greater above the

seating plane, shall not exceed a maximum value of 0.61mm (0.024 inch).

7. Controlling dimension: MILLIMETER. Converted inch dimensions are not

necessarily exact.

8. This outline conforms to JEDEC publication MS-012-AA ISSUE C.

Page 16 of 16

Share Link: