A8425
High Current Photoflash Capacitor Charger
with IGBT Driver for Two Li+ Batteries
ELECTRICAL CHARACTERISTICS (continued) typical values valid at VIN = VBAT= 3.6 V, RSET = 40 kΩ, ISWlim = 2.0 A, and TA=25°C, unless
otherwise noted
Characteristics
Symbol
Test Conditions
Min. Typ. Max. Unit
IGBT Driver
VDRV Pin IGBT Driver Supply Voltage
VDRV
3
–
5.5
V
TRIGGERx Pins Input Current
ITRIG
VTRIGGER = VIN
–
36
–
μA
TRIGGERx Pins High Input Voltage1
VTRIG(H) Over input supply range, VIN
1.4
–
–
V
TRIGGERx Pins Low Input Voltage1
VTRIG(L) Over input supply range, VIN
–
–
0.4
V
TRIGGERx Pins Pull-down Resistor
RTRIGPD
–
100
–
kΩ
GSOURCE On-Resistance to VDRV
RSrcDS(on) VDRV = 3.6 V, VGSOURCE= 1.8 V
–
6
–
Ω
GSINK On-Resistance to GND
RSnkDS(on) VDRV = 3.6 V, VGSINK= 1.8 V
–
20
34
Ω
Propagation Delay (Rising)
tdr
–
30
–
ns
Propagation Delay (Falling)
Output Rise Time
tdf
Connect GSOURCE to GSINK, RGATE = 12 Ω,
tr
CLOAD = 6500 pF, VDRV = 3.6 V
–
140
–
ns
–
80
–
ns
Output Fall Time
tf
–
320
–
ns
1Specifications over the range TA= –40°C to 85°C; guaranteed by design and characterization.
2Current limit guaranteed by design and correlation to static test. Refer to Application Information section for peak current in actual circuits.
Allegro MicroSystems, Inc.
6
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com