STV5348
Register
Function
Bit(s)
Description
PON (D0, D1)
Picture on (IN: D0, OUT: D1)
R5
Address
05H
Display control for
normal operation
TEXT (D2, D3)
COR (D4, D5)
BKGND (D6, D7)
Text on (IN: D2, OUT: D3)
Contrast reduction on (IN: D4, OUT: D5)
Background color on (IN: D6, OUT: D7)
IN / OUT
Enable inside/outside the box
R6
Address
06H
Display control for
news-flash subtitle
generation
See R5
See R5
BOX ON 0, 1-23,24 The "boxing" function is enabled on row 0,1-23 and
(D0, D1, D2)
24 by D0, D1 and D2 set to one.
TOP / BOTTOM X0 = Normal
Single / Double Height 01 = double height Rows 0 to 11
R7
(D4/D3)
11 = double height Rows 12 to 23
Address
07H
Display mode
Conceal / Reveal (D5) Conceal Reveal Function
t(s) Cursor ON/OFF (D6) Cursor position given by row/column value of R9/R10
c STATUS ROW
u BTM / TOP (D7)
The row 24 is displayed before the "Main text Area"
(lines 0-23) or after (D7 = 0).
d VPS Enable (D4) D4 = 1 Enable VPS acquisition and DV signal output.
ro Clear Memory (D3) D4 = 1 Clear memory.
P R8
Memory access
Chapter selected with A2A1A0 (D2, D1, D0) R4.
te Chapter Address
le (D2, D1, D0)
Chapter selection
so R9 to R11A
b Address
08H to 0BH (1)
Active row address (R9), active column address (R10).
Data contained in R11A read (written) from (to) memory by microprocessor via I2C.
t(s) - O R11B
Address
roduc 0BH (1)
Status
VCS QUAL (D0)
DATA QUAL (D1)
50/60Hz (D7)
Good VCS quality signal detected (D0 = 1).
Bad VCS quality signal detected (D0 = 0).
Good TELETEXT signal (D1 = 1).
Bad TELETEXT signal (D1 = 0).
If D1 = 0 frame frequency is 50Hz
(only valid with good VCS)
Obsolete P Note: 1. Reading of R11A or R11B is determined by register 0, bit D0. However, write operation is always performed on R11A register.
14/30