L7200
INTERNAL REGISTERS DEFINITION (continued)
Reg:
14
Name: System FunctionSet-Up Register
Type: Write only
Address: EEh
BIT
LABEL
0 GAINSWITCH
1 EXTP
2 EXTN
3 EXTVCM
4 VBDIS
5 SHOCKEN
6
7
DESCRIPTION
VCM current loop Gain Switch. “0” Switch open. “1” Switch close.
VCM external mode VCMP output. “0” VCMP low. “1” VCMP high.
VCM external mode VCMN output. “0” VCMN low. “1” VCMN high.
VCM mode. “0” Internal. “1” External.
Vboost oscillatotor. “0” Enabled. “1” Disabled.
Schock Detector. “0” Disabled. “1” Enabled.
Reg:
15
Name: Spindle Diagnostic Register
Type: Read only
Address: 0Fh
BIT
0 LOCK
LABEL
1 NOTHR
2 PHREADY
3 STUCKROTOR
4 PHASE<0>
5 PHASE<1>
6 PHASE<2>
7 BACKSPIN
DESCRIPTION
“0” Indicates Spindle Speed error (>16µS sample, either mechanical or
electrical).
“1” Indicates that the Inductive Sense threshold is not reached.
“1” Indicates that the Phase reading of the motor succeded.
“1” Indicates that the Spindle BEMF is not detected.
Inductive Sense Phase detected. First Bit.
Inductive Sense Phase detected. Second Bit.
Inductive Sense Phase detected. Third Bit.
“1” Indicateds a Back rotation of the Spindle Motor.
19/23