STP6NC90ZFP 데이터 시트보기 (PDF) - STMicroelectronics
부품명
상세내역
제조사
STP6NC90ZFP
STMicroelectronics
STP6NC90ZFP Datasheet PDF : 13 Pages
| |||
STP6NC90Z/STP6NC90ZFP/STB6NC90Z/STB6NC90Z-1
ELECTRICAL CHARACTERISTICS (CONTINUED)
SWITCHING ON
Symbol
Parameter
Test Conditions
td(on)
tr
Turn-on Delay Time
Rise Time
VDD = 450 V, ID = 3 A
RG = 4.7Ω VGS = 10V
(see test circuit, Figure 3)
Qg
Total Gate Charge
Qgs
Gate-Source Charge
VDD = 720V, ID = 6A,
VGS = 10V
Qgd
Gate-Drain Charge
SWITCHING OFF
Symbol
Parameter
tr(Voff)
Off-voltage Rise Time
tf
Fall Time
tc
Cross-over Time
Test Conditions
VDD = 720V, ID = 6 A,
RG = 4.7Ω, VGS = 10V
(see test circuit, Figure 5)
Min. Typ. Max. Unit
24
ns
8
ns
42
58.8
nC
13
nC
15
nC
Min.
Typ.
10
11
14
Max.
Unit
ns
ns
ns
SOURCE DRAIN DIODE
Symbol
Parameter
Test Conditions
ISD
Source-drain Current
ISDM (2) Source-drain Current (pulsed)
VSD (1) Forward On Voltage
ISD = 6 A, VGS = 0
trr
Qrr
IRRM
Reverse Recovery Time
Reverse Recovery Charge
Reverse Recovery Current
ISD = 6 A, di/dt = 100A/µs,
VDD = 40 V, Tj = 150°C
(see test circuit, Figure 5)
Min. Typ. Max. Unit
5.4
A
21.6
A
1.6
V
680
ns
7.14
µC
21
A
GATE-SOURCE ZENER DIODE
Symbol
Parameter
Test Conditions
BVGSO
Gate-Source Breakdown
Voltage
Igs=± 1mA (Open Drain)
αT
Voltage Thermal Coefficient T=25°C Note(3)
Rz
Dynamic Resistance
ID = 50 mA, VGS = 0
Note: 1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %.
2. Pulse width limited by safe operating area.
3. ∆VBV = αT (25°-T) BVGSO(25°)
Min.
25
Typ.
1.3
90
Max. Unit
V
10-4/°C
Ω
PROTECTION FEATURES OF GATE-TO-SOURCE ZENER DIODES
The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s
ESD capability, but also to make them safely absorb possible voltage transients that may occasionally
be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient
and cost-effective intervention to protect the device’s integrity. These integrated Zener diodes thus avoid
the usage of external components.
3/13
Share Link: