DatasheetQ Logo
Electronic Components and Semiconductors search and free download site. Transistors,MosFET,IGBT,Triac,SCR,Diode,Integrated circuits
>>> ETC1 >>> A2111 데이터시트

A2111 데이터시트 - ETC1

A2111 Datasheet PDF ETC1

부품명
A2111

Other PDF
  not available.

PDF

page
2 Pages

File Size
107 kB

제조사
ETC1
ETC1 GO URL

[Ample Communications]

Overview
The Skyhawk is a highly integrated, ultra-low-power frame processing solution for 10 Gigabit Ethernet (10 GbE) physical layer applications. The device provides complete PCS-R, PCS-W, and WIS functionality and can operate as a 10 GbE LAN or WAN PHY.


FEATUREs
WIS Layer Processing
• Support for all WIS framing and frame synchronization functions
• Complete section, line, and path overhead layer termination
• Generation and verification of BIP-8 parity
• Pointer processing for receive payload extraction and transmit payload mapping
• Extraction and insertion of transport and path overhead from/to dedicated external pins or from registers
• WIS alarm insertion and detection
• Frame-synchronous X7 + X6 + 1 scrambling and descrambling
• Error rate monitoring

10 GbE Processing
• 10 GbE WAN and LAN PHY functionality
• Complete PCS-R and PCS-W functionality including:
   • 64b/66b encoding and decoding
   • X58 + X39 + 1 scrambling and descrambling
   • 66:16 gearboxing
   • Block synchronization
   • Rate matching
   • Block_lock detection
   • Remote and local fault handling

Line-Side Interface
• Support for two configurations
   • Standard XSBI (SFI-4) 16-bit, 622.08 MHz, LVDS interface for 10 GbE WAN PHY mode
   • Standard XSBI 16-bit, 644.53 MHz, LVDS interface for 10 GbE LAN PHY mode

System-Side Interfaces
• Selectable XGMII interface: HSTL2 or SSTL

CPU Interface
• 32-bit synchronous CPU interface; support for both Intel and Motorola-type processors
• MDIO and MDC management interface and registers

Test and Diagnostic Support
• Built-in pattern generators and verifiers
• Multiple diagnostic loopbacks
• IEEE 1149.1 port with memory BIST, scan, and JTAG boundary scan

General Specifications
• Packaging: 672-pin flip-chip BGA
• Technology: low-power CMOS 1.8V, 3.3V-tolerant I/Os on CPU and other interfaces
• Ambient operating temperature: 0°C to 70°C
• Power dissipation: 3.5 W max, 2.7 W typical

Standards Compliance
• IEEE 802.3ae-D3.1 draft specification
• ANSI T1.416 – 1999


APPLICATIONs
• 10 GbE LAN or WAN switching equipment
• 10 GbE WAN or LAN PHYs
• Ethernet line-terminating equipment (ELTE)
• Edge and core routers
• Multiservice switches
• Uplink cards
• 10 GbE test equipment

Page Link's: 1  2 

부품명
상세내역
보기
제조사
Dual-Channel 10-GbE SFI-to-XAUI LAN/WAN PHY with 1588
PDF
Broadcom Corporation
Integrated 10/100 Ethernet MAC + PHY
PDF
Unspecified
10/100 Ethernet MAC and PHY
PDF
Teridian Semiconductor Corporation
10/100 Ethernet MAC and PHY
PDF
Maxim Integrated
10/100 Fast Ethernet PHY Transceiver
PDF
SMSC -> Microchip
SYNCHRONOUS ETHERNET WAN PLL
PDF
Integrated Device Technology
SYNCHRONOUS ETHERNET WAN PLL
PDF
Integrated Device Technology
SYNCHRONOUS ETHERNET WAN PLL
PDF
Integrated Device Technology
SYNCHRONOUS ETHERNET WAN PLL ( Rev : 2009 )
PDF
Integrated Device Technology
SYNCHRONOUS ETHERNET WAN PLL
PDF
Integrated Device Technology

Share Link: GO URL

All Rights Reserved© datasheetq.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]