LM8V311 데이터 시트보기 (PDF) - Sharp Electronics

부품명

상세내역

제조사

LM8V311

DEVlCESPECIFICATIONfoor for Passive Matrix Color LCD Module (640 X 480 dots)

Sharp Electronics 

SHARP

SPEC No.

LC98312

MODEL

No.

LhI8V3 11

1 PAGE

3

13) Procedure insert mating connector

When the mating connector is inserted it should be parallel to the used connector of LCD module and it

should be inserted horizontally.

when the mating connector is attempted to be fiied to LCD comxctor, it should be inserted properly io order

not to create a gap as shown “A”.

Please insert the coooector as both edge is placed to the connect position of LCD comxctor.

14) This specification describes display quality in case of no gray scale. Since display quality can be affected by

gray scale methods, display quality shall be carefully evaluated for the usability of LCD module in case gmy

scale is displayed on the LCD module.

15) The module should be driven according to the specified ratings to avoid permamnt damage.

DC voltage drive leads to rapid deteriomtion of LC, so ensure that the drive is alternating waveform by

continuous application of the signal M. ~sneciallv the Dower ON/OFF seauence shown on Page 25 should be

kept to avoid latch-w of drive LSIs and aonlication of DC voltaee to LCD onnel.

Share Link: