RMBA19500-58(1999) 데이터 시트보기 (PDF) - Raytheon Company
부품명
상세내역
제조사
RMBA19500-58 Datasheet PDF : 7 Pages
| |||
Raytheon
Raytheon Commercial Electronics
RMBA19500-58
PCS/DCS1800 2 Watt Linear GaAs MMIC Power Amplifier
Application Information
PARTS LIST for Test Evaluation Board (RMBA19500-58-TB, G654188/G654942)
PART
VALUE
SIZE(EIA)
Vendor(s)
L1, L2
L3
5.6 nH
8.2 nH
.06Ó x .03Ó
.08Ó x .05Ó
Toko (LL1608-F5N6)
Coilcraft (0805HT-8N2TKBC)
C1
C2
C3, C4, C5
C10, C9
C8
C6,C7
10 pF
2.2 pF
1500 pF
2.2 pF
10.0 uF
0.1uF
.06Ó x .03Ó
.06Ó x .03Ó
.06Ó x .03Ó
.06Ó x .03Ó
.12Óx.06Ó
Murata (GRM39COG100J050AD)
Murata (GRM39COG2R2J050BD)
Murata (GRM39Y5V152Z50V)
Murata (GRM39COG2R2J050BD)
TDK (CC1206JX5R106M)
Murata (GRM39Y5V104Z)
R1-R5
R2
R3
R4
U1
HS
20 Ohms
180 Ohms
3.3K Ohms
30 Ohms
RMBA19500-58
Heatsink
.06Óx .03Ó
.06Óx .03Ó
.06Óx .03Ó
.06Óx .03Ó
.31Ó x .41
IMS (RCI-0603-20R0J)
IMS (RCI-0603-1800J)
IMS (RCI-0603-3301J)
IMS (RCI-0603-30R0J)
Raytheon, G654466/G653367
Raytheon, G655548
P1-P5
J1, J2
Board
Terminals
SMA Connectors
FR4
Samtec (TSW-102-09-T-S-RE)
E.F. Johnson (142-0701-841)
Raytheon Dwg# G654187/G654941
Recommendations for Heat-Sinking the RMBA19500-58
PWB must be prepared with a heat sink, made of a highly conductive (electrical and thermal) material
such as copper or aluminum with necessary surface plating, attached to the backside of PWB where
the package is to be mounted on the front side. A small pedestal in the heat sink should protrude
through a hole in the PWB where the package bottom is directly soldered. Use Sn/Pb (67/37) solder (or
Sn/Pn/Ag 62/36/2 solder) at 220¡C for 20 seconds or less. The package bottom should be firmly
soldered to the pedestal while the pins are soldered to the respective pads on the front side of PWR
without causing any stress on the pins. To accomplish stress free mounting, the top surface of the
pedestal should be made flush with the top surface of PWB. Remove flux completely if used for
soldering.
This is advanced information which contains data on products in development. Characteristic
performance data and specifications are subject to change without notice.
Tel: 978-470-9421
FAX: 978-470-9201
www.raytheon.com/micro
Revised October 22, 1999
Page 5
Raytheon RF Components
362 Lowell Street
Andover, MA 01810
Share Link: 