MT9122 데이터 시트보기 (PDF) - Mitel Networks

부품명

상세내역

제조사

MT9122

Dual Voice Echo Canceller with Tone Detection

Mitel Networks 

Preliminary Information

MT9122

Functional Description

The MT9122 architecture contains two individually

controlled echo cancellers (Echo Canceller A and B).

They can be set in three distinct configurations:

Normal, Back-to-Back and Extended Delay (see

Figure 3). Under Normal configuration, the two echo

cancellers are positioned in parallel providing 64

millisecond echo cancellation in two channels

simultaneously. In Back-to-Back configuration, the

two echo cancellers are positioned to cancel echo

coming from both directions in a single channel. In

Extended-Delay configuration, the two echo

cancellers are internally cascaded into one 128

millisecond echo canceller.

Each echo canceller contains the following main

elements (see Figure 1).

• Adaptive Filter for estimating the echo channel

• Subtracter for cancelling the echo

• Double-Talk detector for disabling the filter

adaptation during periods of double-talk

• Non-Linear Processor for suppression of

residual echo

• Disable Tone Detectors for detecting valid

disable tones at the input of receive and send

paths

• Narrow-Band Detector for preventing Adaptive

Filter divergence caused by narrow-band

signals

• Offset Null filters for removing the DC

component in PCM channels

• 12dB attenuator for signal attenuation

• Serial controller interface compatible with

Motorola, National and Intel microcontrollers

• PCM encoder/decoder compatible with µ/A-

Law ITU-T G.711, µ/A-Law Sign-Mag or linear

2’s complement coding

The MT9122 has two modes of operation:

Controllerless and Controller. Controllerless mode is

intended for applications where customization is not

required. Controller mode allows access to all

registers for customizing the MT9122 operation.

Refer to Table 7 for a complete list. Controller mode

is selected when CONFIG1 and CONFIG2 pins are

both connected to Vss.

Each echo canceller in the MT9122 has four

functional states: Mute, Bypass, Disable Adaptation

and Enable Adaptation. These are explained in the

section entitled Echo Canceller Functional States.

PORT 2

PORT 1

Sin

echo

path A

Rout

channel A

+

-

Adaptive

Filter (64ms)

channel A

Sout

Rin

E.C.A

Optional -12dB pad

PORT 2

channel A

Sin

+

echo

path A

-

Adaptive Filter

(128 ms)

Rout

channel A

PORT 1

Sout

Rin

E.C.A

Optional -12dB pad

b) Extended Delay Configuration (128ms)

echo

path B

channel B

+

-

Adaptive

Filter (64ms)

channel B

E.C.B

Optional -12dB pad

a) Normal Configuration (64ms)

PORT 2

PORT 1

Sin

echo

path

Rout

+

-

Optional -12dB pad

Adaptive

Filter (64ms)

Adaptive

Filter (64ms)

-

+

Sout

echo

path

Rin

E.C.A

Optional -12dB pad

E.C.B

c) Back-to-Back Configuration (64ms)

Figure 3 - Device Configuration

8-21

Share Link: