ST24E16 데이터 시트보기 (PDF) - STMicroelectronics

부품명

상세내역

제조사

ST24E16

16 Kbit Serial I2C EEPROM with Extended Addressing

STMicroelectronics 

ST24E16, ST25E16

Figure 8. Write Modes Sequence with Write Control = 0

WC

BYTE WRITE

ACK

ACK

ACK

NO ACK

DEV SEL

BYTE ADDR BYTE ADDR

DATA IN

R/W

WC

PAGE WRITE

WC (cont'd)

PAGE WRITE

(cont'd)

ACK

ACK

ACK

NO ACK

DEV SEL

BYTE ADDR BYTE ADDR DATA IN 1

DATA IN 2

R/W

NO ACK

NO ACK

DATA IN N

AI01120B

Read Operations

On delivery, the memory content is set at all "1’s"

(or FFh).

Current Address Read. The ST24/25E16 have

an internal 11 bits address counter. Each time a

byte is read, this counter is incremented. For the

Current Address Read mode, following a START

condition, the master sends a Device Select with

the RW bit set to ’1’. The ST24/25E16 acknowledge

this and outputs the byte addressed by the internal

address counter. This counter is then incremented.

The master does NOT acknowledge the byte out-

put, but terminates the transfer with a STOP con-

dition.

Random Address Read. A dummy write is per-

formed to load the address into the address

counter, see Figure 10. This is followed by another

START condition from the master and the byte

address repeated with the RW bit set to ’1’. The

ST24/25E16 acknowledge this and outputs the

byte addressed. The master does NOT acknow-

ledge the byte output, but terminates the transfer

with a STOP condition.

Sequential Read. This mode can be initiated with

either a Current Address Read or a Random Ad-

dress Read. However, in this case the master

DOES acknowledge the data byte output and the

ST24/25E16 continue to output the next byte in

10/16

Share Link: