LC587008, 587006, 587004
Oscillator Circuit Options
Option
Circuit configuration
Note
RC and Xtal
• The cycle time is four times the f1 period.
• The divider outputs (ø1 to ø15) are used as
the time base, the LCD drive waveform
generation clock, the S and K port
chattering rejection clock and for other
functions.
• OSC1 is stopped when a SLOW instruction
is executed.
CF and Xtal
• 400 kHz (CF)
• 4 MHz (CF)
• The cycle time is four times n times the f1
period. (Note: n is 2.)
• The divider outputs (ø1 to ø15) are used as
the time base, the LCD drive waveform
generation clock, the S and K port
chattering rejection clock and for other
functions.
• OSC1 is stopped when a SLOW instruction
is executed.
• The cycle time is four times the f1 period.
• The divider outputs (ø1 to ø15) are used as
RC
the LCD drive waveform generation clock,
the S and K port chattering rejection clock
and for other functions.
Continued on next page.
No. 4435-8/29