UGQ5140K 데이터 시트보기 (PDF) - Allegro MicroSystems

부품명

상세내역

제조사

UGQ5140K

PROTECTED POWERHALL® SENSOR — LAMP/SOLENOID DRIVER

Allegro MicroSystems 

5140

PROTECTED POWERHALL®

SENSOR:

LAMP/SOLENOID DRIVER

Dimensions in Inches

(controlling dimensions)

0.208

0.203

45°

0.063

0.059

Dimensions in Millimeters

(for reference only

5.28

5.16

45°

1.60

1.50

0.138

0.133

0.085 1 2 3 4

MAX

0.600

0.560

SEE NOTE

0.016

0.050

BSC

45°

0.033

0.015

3.51

3.38

2.16 1 2 3 4

MAX

15.24

14.23

SEE NOTE

Dwg. MH-009C in

0.41

1.27

BSC

45°

0.84

0.38

Dwg. MH-009C mm

NOTES: 1. Tolerances on package height and width represent allowable mold offsets. Dimensions given are measured at the widest point (parting line).

2. Exact body and lead configuration at vendor’s option within limits shown.

3. Height does not include mold gate flash.

4. Recommended minimum PWB hole diameter to clear transition area is 0.035” (0.89 mm).

5. Where no tolerance is specified, dimension is nominal.

Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from

the detail specifications as may be required to permit improvements in the design of its products.

The information included herein is believed to be accurate and reliable. However, Allegro

MicroSystems, Inc. assumes no responsibility for its use; nor for any infringements of patents or

other rights of third parties which may result from its use.

115 Northeast Cutoff, Box 15036

Worcester, Massachusetts 01615-0036 (508) 853-5000

Share Link: