SA11(2020) 데이터 시트보기 (PDF) - Vishay Semiconductors
부품명
상세내역
제조사
SA11 Datasheet PDF : 7 Pages
| |||
www.vishay.com
SA5.0A thru SA170CA
Vishay General Semiconductor
TRANSZORB® Transient Voltage Suppressors
DO-15 (DO-204AC)
PRIMARY CHARACTERISTICS
VWM
VBR (uni-directional)
5.0 V to 170 V
6.4 V to 209 V
VBR (bi-directional)
6.4 V to 209 V
PPPM
PD
500 W
3.0 W
IFSM (uni-directional only)
70 A
TJ max.
Polarity
175 °C
Uni-directional, bi-directional
Package
DO-15 (DO-204AC)
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional types, use CA suffix (e.g. SA5.0CA,
SA170CA).
Electrical characteristics apply in both directions.
FEATURES
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 500 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty
cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
MECHANICAL DATA
Case: DO-15 (DO-204AC)
Molded epoxy over passivated chip
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: for uni-directional types the color band denotes
cathode end, no marking on bi-directional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1)
Peak pulse current with a 10/1000 μs waveform (1)
PPPM
IPPM
500
See next table
Power dissipation on infinite heatsink at TL = 75 °C (fig. 5)
PD
3.0
Peak forward surge current 10 ms single half sine-wave uni-directional only
IFSM
70
Maximum instantaneous forward voltage at 100 A for uni-directional only (3)
VF
3.5
Operating junction and storage temperature range
TJ, TSTG
-55 to +175
Notes
(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
(2) 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
UNIT
W
A
W
A
V
°C
Revision: 03-Mar-2020
1
Document Number: 88378
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Share Link: 