PU30 데이터 시트보기 (PDF) - International Power DC Power Supplies
부품명
상세내역
제조사
PU30 Datasheet PDF : 2 Pages
| |||
XPiQ inc.
Intelligent Design Quality Product
Switching Power Supply
30 Watts
PU30 Series
•
Built-in EMI Filter
•
100% Burn-in
•
Input Surge Current Protection
•
Small Size, 2.76” x 5.12” x 1.20”
•
Universal Input Voltage (85-264 VAC)
•
Overvoltage Protection
•
Overcurrent Protection
Specification
All specifications typical at nominal line, full load and 25°C
Input
Input Voltage
Input Frequency
Input Current
DC Input Voltage
• 85 to 264 VAC
• 47 to 440 Hz
• 0.8A (rms for 115 VAC
0.5A (rms) for 230 VAC
• 115-280 VDC
Output
Output Voltage:
•
Output Current
•
Output Power Range •
Ripple and Noise
•
Overvoltage
•
Protection:
Overcurrent
•
Protection:
Temperature
•
coefficient:
See Rating Charts
See Rating Charts
0 to 30 Watts
1% peak to peak max.
Provided on output #1 only;
set at 112-132% of its nominal
output voltage
All outputs protected to short
circuit conditions
All outputs ±0.04%/°C
maximum
General
Efficiency
•
Hold-up time
•
Line Regulation
•
Inrush Current
•
Withstand Voltage •
Insulation Resistance •
Environmental
Operating
•
Temperature
Storage
•
Temperature
MTBF
•
EMI Requirement
•
Safety Requirements •
65% minimum at 30 watt output
12 msec minimum
±0.5% maximum at full load
15A at 115 VAC or
30A at 240 VAC at 25°C cold start
3000 VAC from input to output
1500 VAC from input to ground
10 Mohm minimum from
output to ground
0°C to +70°C*
-40°C to +85°C
100,000 hours minimum at full load
at 25°C ambient
Meets the conducted limits of
a) FCC 20780 Level B
b) CISPR 22 (EN 55022) Level B
Approved to:
a) UL 1950
b) CSA C22.2 No.234
c) TUV per EN60950 (IEC 950)
* Derate linearly from 100% load at 50°C to 50% load at 70°C
61 www.XP-iQ.com
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xp-iq.com
Holliston, MA 01746 USA
Share Link: 