MC33470 데이터 시트보기 (PDF) - ON Semiconductor
부품명
상세내역
제조사
MC33470 Datasheet PDF : 15 Pages
| |||
MC33470
ELECTRICAL CHARACTERISTICS (VCC = 5.0 V,PPVVCCCC , = 12 V for typical values TA = Low to High [Notes 8, 9, 10],
for min/max values TA is the operating ambient temperature range that applies, unless otherwise noted.)
Characteristic
Symbol
Min
Typ
Max Unit
OVERTEMPERTURE OUTPUT
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Threshold For Logic “1” to “0” Transition (OUTEN Voltage Decreasing)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Delay Time
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Sink Current (VOL = 0.5 V)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ LOGIC INPUTS (VID0, VID1, VID2, VID3, VID4)
Input Low State
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Input High State
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Input Impedance
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ OUTPUT ENABLE CONTROL (OUTEN)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Over−Temperature Driver Disable and Reset (OUTEN Voltage Decreasing)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ (Note 11)
VthOUTEN
1.85
2.0
2.2
V
tDOT
25
50
100
ms
IOLF
−
10
−
mA
VIL
−
−
0.8
V
VIH
3.5
−
−
V
Rin
−
10
−
kW
VOTDD
1.55 1.70 1.85
V
OUTPUT SECTIONS (G1, G2)
SSoinukrcReeRsiesstaisntcaenc(Ves(eVnsseen=se0=V2,.V0GV,=V1G.0=VP)VVCCCC − 1.0 V)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Output Voltage with OUTEN Reset (Isink = 1.0 mA)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Output Voltage Rise Time (CL = 10 nF, TJ = 25°C)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Output Voltage Fall Time (CL = 10 nF, TJ = 25°C)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ G1, G2 Non−Overlap Time (CL = 10 nF, TJ = 25°C)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ TOTAL DEVICE
ROH
ROL
VOL
tr
tf
tNOL
−
0.5
−
W
−
0.5
−
−
0.1
0.5
V
−
70
140
ns
−
70
140
ns
30
150
210
ns
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Minimum Operating Voltage After Turn−On (PVVCCCCDecreasing)
Minimum Operating Voltage After Turn−On (VCC Decreasing)
PVCC min
10.8
−
−
V
VCC min
3.0
−
4.25
V
VCC Current (Note 12) (OUTEN and PVVCCCC open, VID0, 1, 2, 3, 4 Floating)
ICC
−
3.7
8.0
mA
PPVVCCCC Current (OUTEN = 5.0 V, VID0, 1, 2, 3, 4 Open,PPVVCCCC = 12 V)
PICC
−
15
−
mA
8. Maximum package power dissipation limits must be observed.
9. Low duty cycle pulse techniques are used during test to maintain junction temperature as close to ambient as possible.
10. VID1, VID3, VID4 = logic 0, and VID0, VID2 = logic 1.
11. OUTEN is internally pulled low if VID0, 1, 2, 3, and 4 are floating.
12. Due to internal pullup resistors, there will be an additional 0.5 mA per pin if any of the VID0, 1, 2, 3, or 4 pins are pulled low.
http://onsemi.com
4
Share Link: 