NTE56020 데이터 시트보기 (PDF) - NTE Electronics

부품명

상세내역

제조사

NTE56020

TRIAC, 25 Amp

NTE Electronics 

NTE56019 and NTE56020

TRIAC, 25 Amp

Description:

The NTE56019 and NTE56020 are 25 Amp TRIACs with a repetitive peak blocking of 200V and

400V respectively. These devices may be gate triggered from a blocking to conduction state for

either polarity of applied voltage and are designed for AC switching and phase control applications

such as speed and temperature modulation controls, lighting controls, and static switching relays.

The triggering signal is normally applied between the Gate and MT1.

Features:

D Electrically Isolated TO220 Type Package

D Glass–Passivated Junctions

D Surge Capability: Up to 400A

Absolute Maximum Ratings: (TA = +25°C, 60Hz, with a resistive load unless otherwise specified)

Repetitive Peak Blocking Voltage (Note 1), VDRM

NTE56019 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200V

NTE56020 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400V

RMS On–State Current (Conduction Angle of 360°, TC = –40° to +125°C), IT(RMS) . . . . . . . . . . 25A

Non–Repetitive On–State Current (One Cycle), ITSM

60Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250A

50Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208A

Fusing Current (t = 8.3ms), I2t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259A2s

Peak Gate Current (Pulse Width ≤ 10µs Max), IGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2A

Peak Gate Dissipation (Pulse Width ≤ 10µs, IGT ≤ IGTM), PGM . . . . . . . . . . . . . . . . . . . . . . . . . . . 20W

Gate Dissipation, PG(AV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mW

Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +125°C

Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +125°C

Thermal Resistance, Junction–to–Case, RthJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5K/W

Thermal Resistance, Junction–to–Ambient, RthJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60K/W

Lead Temperature (During Soldering, 1/16” from case, 10sec max), TL . . . . . . . . . . . . . . . . . +230°C

Note 1. For either polarity of MT2 with reference to MT1 terminal.

Electrical Characteristics: (TA = +25°C unless otherwise specified)

Parameter

Symbol

Test Conditions

Off–State Leakage Current

On–State Voltage

IDRM

VTM

VD = VDRM, TJ = +25°C, Note 1

VD = VDRM, TJ = +125°C, Note 1

IT(RMS) = 25A, Note 1

Note 1. For either polarity of MT2 with reference to MT1 terminal.

Min Typ Max Unit

–

– 0.1 mA

–

–

3 mA

–

– 1.8 V

Share Link: