TX2-L-H-1.5-X 데이터 시트보기 (PDF) - Panasonic Corporation
부품명
상세내역
제조사
TX2-L-H-1.5-X
Panasonic Corporation
TX2-L-H-1.5-X Datasheet PDF : 7 Pages
| |||
TX
2. Specifications
Characteristics
Item
Arrangement
Contact
Initial contact resistance, max.
Contact material
Rating
Nominal switching capacity
Max. switching power
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)1*
Nominal operating
power
Single side stable
1 coil latching
2 coil latching
Insulation resistance (Initial)
Electrical
characteristics
Breakdown voltage
(Initial)
Surge breakdown
voltage (Initial)
Between open contacts
Between contact and coil
Between contact sets
Between open contacts
Between contacts and coil
Temperature rise (at 20C 68F)
Operate time [Set time] (at 20C 68F)
Mechanical
characteristics
Expected life
Release time [Reset time] (at 20C 68F)
Shock resistance
Functional
Destructive
Functional
Vibration resistance
Destructive
Mechanical
Electrical
Conditions
Unit weight
Conditions for operation, transport and storage2*
Max. operating speed (at rated load)
Specifications
2 Form C
Max. 100 m (By voltage drop 6 V DC 1A)
Standard contact: Ag+Au clad,
AgPd contact (low level load): AgPd+Au clad (stationary), AgPd (movable)
Standard contact: 2 A 30 V DC, AgPd contact: 1 A 30 V DC (resistive load)
Standard contact: 60 W (DC), AgPd contact: 30 W (DC) (resistive load)
220V DC
Standard contact: 2 A, AgPd contact: 1 A
10A 10mV DC
140 mW (1.5 to 24 V DC), 270 mW (48 V DC)
100 mW (1.5 to 24 V DC)
200 mW (1.5 to 24 V DC)
Min. 1,000M (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
1,000 Vrms for 1min. (Detection current: 10mA)
2,000 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
1,500 V (10160s) (FCC Part 68)
2,500 V (210s) (Telcordia)
Max. 50C
(By resistive method, nominal coil voltage applied to the coil; contact carrying current: 2A.)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.) (without diode)
Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10s.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.)
10 to 55 Hz at double amplitude of 5 mm
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive), 5105 (1 A 30 V DC resistive) (at 20 cpm)
Ambient temperature: –40C to +85C (up to 24 V coil) –40F to +185F (up to 24 V coil)
[–40C to +70C (48 V coil) –40F to +158F (48 V coil)];
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
20 cpm
Approx. 2 g .071 oz
1* This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual
load. (AgPd contact type is available for low level load switching [10V DC, 10mA max. level].)
2* Refer to “6. Usage, Storage and Transport Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.
REFERENCE DATA
1. Maximum switching capacity
3.0
2.0
DC resistive load
1.0
0.5
0.4
0.3
0.2
0
20 30 50 100 200 300
Contact voltage, V
2. Life curve
100
50
30
30V DC
resistive load
20
10
0
1.0
2.0
Switching current, A
3. Mechanical life
Tested sample: TX2-5V, 10 pcs.
Operating speed: 180 cpm
100
90
80
70
Pick-up voltage
Max.
60
Min.
50
40
30
Drop-out voltage
20
Max.
10
Min.
0
10
100
1,000 10,000
No. of operations, x104
4
ds_61022_en_tx: 060213D
Share Link: