LH4002 데이터 시트보기 (PDF) - Calogic, LLC
부품명
상세내역
제조사
LH4002 Datasheet PDF : 5 Pages
| |||
LH4002A / LH4002 / LH4002C
CORPORATION
AC ELECTRICAL CHARACTERISTICS
The following specifications apply for Supply Voltage = ±5V, VCM = 0, RL ≥ 100KΩ and RS = 50Ω unless otherwise noted.
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25oC.
SYMBOL CHARACTERISTICS TYP
LH4002A
LH4002
LH4002C
Limit (Note 5) Limit (Note 5) Limit (Note 5)
UNITS
CONDITIONS
SR1
Slew Rate 1
SR2
Slew Rate 2
3000
2000
2750
1750
2500
1600
2500
1500
V/µs
VIN = ±2V, RL = 50Ω (Note 2)
VIN = ±4V, RL = 50Ω (Note 2)
SSBW
Small Signal
Bandwidth
300
250
220
200
RL = 50Ω, VOUT = 100mVP-P
LSBW
Large Signal
Bandwidth
140
100
90
MHz
80
RL = 50Ω, VOUT = 2VP-P
PBW
Power Bandwidth
130
100
90
80
RL = 50Ω, VOUT = 4VP-P
tr, tf
Rise Time
Fall Time
1.2
1.5
1.7
1.8
ns
RL = 50Ω, CL ≤ 10pF
VO = 100mVPP
t pd
Propagation Delay
Time
2.0
ns
RL = 50Ω, CL ≤ 10pF
VO = 100mVPP
OS
Overshoot
10
%
RL = 50Ω, CL ≤ 10pF
VO = 100mVPP
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. DC and AC electrical specifications do not
apply when operating the device beyond its rated operating conditions.
Note 2: Slew rate is measured with 50Ω source impedance at 25oC. For accurate measurements, the input slew rate should be at least
5000V/µs.
Note 3: The test circuit consists of the human body model of 120pF in series with 1500Ω.
Note 4: The maximum power dissipation is a function of TJ(max), θJA and TA. The maximum allowable power dissipation at any ambient
temperature is PD = (TJ(max) - TA)/θJA.
Note 5: Limits are guaranteed by testing, correlation or periodic characterization.
Note 6: For N package, θJA is measured by soldering the unit directly on a printed circuit board and V- pins are connected to 2 square inches of 2
oz copper.
CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-1076
Share Link: 