DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

APW7016KC 데이터 시트보기 (PDF) - Anpec Electronics

부품명
상세내역
제조사
APW7016KC
Anpec
Anpec Electronics Anpec
APW7016KC Datasheet PDF : 11 Pages
1 2 3 4 5 6 7 8 9 10
APW7016
Advanced PWM Power Controller
Features
General Description
Simple Single-Loop Control Design
Voltage-Mode PWM Control
Excell Output Voltage Regulation
PWM Output : ±1% Over Temperautre
Fast Transient Response
High-Bandwidth Error Amplifier
Full 0% to 100% Duty Ratio
3-Bit Digital-to-Analog Output Voltage Selection
Over-Voltage and Over-Current Fault Monitors
Small Converter Size
200kHz Free-Running Oscillator
Programmable from 50KHz to 800KHz
Applications
High-Power 5V to 3.xV (or below) DC-DC Regu-
lators
Low-Voltage Distributed Power Supplies
VGA Card Power Regulation
The APW7016 provides a complete control and pro-
tection for a DC-DC converter optimized for high per-
formance microprocessor applications. It is designed
to drive two N-Channel MOSFETs in a synchronous-
rectified buck topology. The APW7016 integrates
output voltage control , monitoring and protection
functions into a single Package.
The APW7016 includes a 3-bit digital-to-analog con-
verter (DAC) that provides a easily adjustable and
precisely output voltage from 1.3VDC to 1.65VDC in
0.05V steps. Any selected output voltage can be
maintained within ±1% accuracy over temperature
and line voltage variations.
With a 200kHz free-running triangle-wave oscillator
and a error amplifier featuring a 15MHz unity-gain
bandwidth and 6V/us slew rate inside the chip ,
APW7016 can implement a simple , single feedback
loop , voltage-mode control topology with high tran-
sient performance.
The APW7016 also features with multiple protections
against over-current and over-voltage conditions by
inhibiting PWM operation. The APW7016 uses the
RDS(ON) of the upper MOSFET as the current sensing
element which eliminates the demend for an extra
component. The APW7016 also monitors the output
voltage using a comparator with hysteresis that tracks
the DAC output.
Pin Description
VSEN 1
OCSET 2
SS 3
VID0 4
VID1 5
VID2 6
COMP 7
FB 8
16 RT
15 VCC
14 LGATE
13 PGND
12 BOOT
11 UGATE
10 PHASE
9 GND
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
Copyright ANPEC Electronics Corp.
1
Rev. A.2 - Oct., 2002
www.anpec.com.tw

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]