ECG004 데이터 시트보기 (PDF) - Unspecified
부품명
상세내역
제조사
ECG004 Datasheet PDF : 4 Pages
| |||
ECG004
InGaP HBT Gain Block
The Communications Edge TM
Product Information
Product Features
• DC – 6 GHz
• +13.5 dBm P1dB at 1 GHz
• +28 dBm OIP3 at 1 GHz
• 16.2 dB Gain at 1 GHz
• 3.2 dB Noise Figure
• Available in Lead-free / green
SOT-89 Package Style
• Internally matched to 50 Ω
Applications
• Mobile Infrastructure
• CATV / FTTX
• W-LAN / ISM
• RFID
• WiMAX / WiBro
Product Description
The ECG004B is a general-purpose buffer amplifier that
offers high dynamic range in a low-cost surface-mount
package. At 1000 MHz, the ECG004B typically provides
16 dB of gain, +28 dBm Output IP3, and +13.5 dBm P1dB.
Functional Diagram
GND
4
The ECG004B consists of Darlington pair amplifiers using
the high reliability InGaP/GaAs HBT process technology
and only requires DC-blocking capacitors, a bias resistor,
and an inductive RF choke for operation. The device is
ideal for wireless applications and is available in a low-
cost, surface-mountable lead-free/green/RoHS-compliant
SOT-89 package. All devices are 100% RF and DC tested.
The broadband MMIC amplifier can be directly applied to
various current and next generation wireless technologies
such as GPRS, GSM, CDMA, and W-CDMA. In addition,
the ECG004B will work for other various applications
within the DC to 6 GHz frequency range such as CATV
and mobile wireless.
1
RF IN
2
GND
3
RF OUT
Function
Input
Output/Bias
Ground
Pin No.
1
3
2, 4
Specifications (1)
Parameter
Operational Bandwidth
Test Frequency
Gain
Output P1dB
Output IP3 (3)
Test Frequency
Gain
Input Return Loss
Output Return Loss
Output P1dB
Output IP3 (2)
Noise Figure
Device Voltage
Device Current
Units
MHz
MHz
dB
dBm
dBm
MHz
dB
dB
dB
dBm
dBm
dB
V
mA
Min
DC
13.5
10.5
3.1
Typ
1000
16.2
+13.5
+28
2000
15.9
19
15
+13
+27
3.2
3.4
35
Max
6000
3.7
1. Test conditions unless otherwise noted: 25 ºC, Supply Voltage = +5 V, Rbias = 45.3 Ω, 50 Ω System.
2. 3OIP measured with two tones at an output power of –1 dBm/tone separated by 1 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
Typical Performance (1)
Parameter
Frequency
S21
S11
S22
Output P1dB
Output IP3
Noise Figure
Units
Typical
MHz 500 900 1900 2140
dB
16.5 16.2 15.5 15.2
dB
-31 -28 -19 -18
dB
-28 -21 -21 -14
dBm +13.6 +13.5 +13 +13
dBm +28 +28 +27 +27
dB
3.3 3.2 3.3 3.3
Absolute Maximum Rating
Parameter
Operating Case Temperature
Storage Temperature
Device Current
RF Input Power (continuous)
Junction Temperature
Rating
-40 to +85 °C
-55 to +150 °C
150 mA
+12 dBm
+250 °C
Ordering Information
Part No.
ECG004B-G
ECG004B-PCB
Description
InGaP HBT Gain Block
(lead-free/green/RoHS-compliant SOT-89 package)
700 – 2400 MHz Fully Assembled Eval. Board
Operation of this device above any of these parameters may cause permanent damage.
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: sales@wj.com • Web site: www.wj.com
Page 1 of 4 April 2006
Share Link: 