MAX98088 데이터 시트보기 (PDF) - Unspecified
부품명
상세내역
제조사
MAX98088 Datasheet PDF : 123 Pages
| |||
Stereo Audio Codec
with FLEXSOUND Technology
ELECTRICAL CHARACTERISTICS (continued)
(VAVDD = VPVDD = VDVDD = VDVDDS1 = VDVDDS2 = +1.8V, VSPKLVDD = VSPKRVDD = 3.7V. Speaker loads (ZSPK) connected
between SPK_P and SPK_N. Receiver load (RREC) connected between RECP and RECN. Headphone loads (RHP) connected from
HPL or HPR to HPGND. Line out loads (RLOAD) connected from LOUTL and LOUTR to ground. RLOAD = RHP = J, RREC = J, ZSPK
= J, CREF = 2.2FF, CMICBIAS = CREG = 1FF, CC1N-C1P = 1FF, CHPVDD = CHPVSS = 1FF. AVMICPRE_ = +20dB, AVMICPGA_ = 0dB,
AVDACATTN = 0dB, AVDACGAIN = 0dB, AVADCLVL = 0dB, AVADCGAIN = 0dB, AVPGAIN_ = 0dB, AVHP_ = 0dB, AVREC = 0dB, AVSPK_
= 0dB, MCLK = 12.288MHz, LRCLK = 48kHz, MAS = 1. TA = +25NC, unless otherwise noted.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX UNITS
VOICE MODE IIR HIGHPASS FILTER (MODE1 = 0)
AVFLT = 0x1 (Elliptical tuned for fS = 16kHz +
217Hz notch)
0.0161
x fS
AVFLT = 0x2 (500Hz Butterworth tuned for fS =
16kHz)
0.0319
x fS
Passband Cutoff
(-3dB from Peak)
fAHPPB
AVFLT = 0x3 (Elliptical tuned for fS = 8kHz +
217Hz notch)
0.0321
x fS
Hz
AVFLT = 0x4 (500Hz Butterworth tuned for fS =
8kHz)
0.0632
x fS
AVFLT = 0x5 (fS/240 Butterworth)
0.0043
x fS
AVFLT = 0x1 (Elliptical tuned for fS = 16kHz +
217Hz notch)
0.0139
x fS
AVFLT = 0x2 (500Hz Butterworth tuned for fS =
16kHz)
0.0156
x fS
Stopband Cutoff
(-30dB from Peak)
fAHPSB
AVFLT = 0x3 (Elliptical tuned for fS = 8kHz +
217Hz notch)
0.0279
x fS
Hz
AVFLT = 0x4 (500Hz Butterworth tuned for fS =
8kHz)
0.0312
x fS
AVFLT = 0x5 (fS/240 Butterworth)
0.0018
x fS
DC Attenuation
DCATTEN AVFLT ≠ 000
90
dB
STEREO AUDIO MODE FIR LOWPASS FILTER (MODE1 = 1, DHF1 = 0, LRCLK < 50kHz)
Passband Cutoff
Passband Ripple
Stopband Cutoff
Ripple limit cutoff
fPLP -3dB cutoff
-6.02dB cutoff
f < fPLP
fSLP
0.43 x fS
0.48 x fS
0.5 x fS
-0.1
Hz
+0.1 dB
0.58 x fS Hz
Stopband Attenuation
(Note 6)
f < fSLP
60
dB
ADC STEREO AUDIO MODE FIR LOWPASS FILTER (MODE1 = 1, DHF1 = 1, LRCLK > 50kHz)
Passband Cutoff
Passband Ripple
Stopband Cutoff
Stopband Attenuation
Ripple limit cutoff
fPLP -3dB cutoff
f < fPLP
fSLP
f < fSLP
0.208 x fS
0.28 x fS
-0.1
60
Hz
+0.1 dB
0.417 x fS Hz
dB
10
Share Link: 