ICR18650-30 데이터 시트보기 (PDF) - Samsung
부품명
상세내역
제조사
ICR18650-30 Datasheet PDF : 14 Pages
| |||
Spec. No.
SAMSUNG SDI Confidential Proprietary.
ICR18650-30A Version No.
0.0
0.05C cut-off and the discharge (discharge current 1500mA) with 2.75 V cut-off.
Capacity after 299cycles and plus 1 day, measured under the same condition
in 7.2
Capacity ≥ 2030mAh(70% of the capacity at 25℃)
7.9 Storage Characteristics
Capacity after storage for 30days at 25℃ from the standard charge,
measured with discharge current 1500mA with 2.75V cut-off at 25℃.
Capacity retention(after the storage) ≥ 2320mAh (80% of the capacity at 25℃)
7.10 Status of the cell as of ex-factory
The cell should be shipped in 50% charged state. In this case, OCV is from 3.65V to
3.85V.
8. Mechanical Characteristics
8.1 Drop Test
Test method: Cell(as of shipment or full charged) drop onto the oak-board
(thickness: ≥ 30mm) from 1.5m height at a random direction 6 times.
Criteria: No leakage
8.2 Vibration Test
Test method: Cell(as of shipment) is vibrated along 2 mutually
perpendicular axes with total excursion of 1.6mm and with
frequency cycling between 10Hz and 55Hz by 1Hz/min.
Criteria: No leakage
9. Safety
9.1 Overcharge Test
Test method: To charge the standard charged cell with 12V and 2.8A at 25℃
for 2.5 hours.
Criteria: No fire, and no explosion.
9.2 External Short-circuit Test
Test method: To short-circuit the standard charged cell by connecting positive and
negative terminal by less than 50mΩ wire for 3hours.
Criteria: No fire, and no explosion.
9.3 Reverse Charge Test
Test method: To charge the standard charged cell with charge current 2.8A
By –12V for 2.5 hours.
Criteria: No fire, and no explosion.
9.4 Heating Test
Test method: To heat up the standard charged cell at heating rate 5℃ per minute up to
4
Mobile Energy Business Team
Share Link: 