PVX-2110 데이터 시트보기 (PDF) - Directed Energy, Inc. An IXYS Company

부품명

상세내역

제조사

PVX-2110

200V 50A PULSE GENERATOR

Directed Energy, Inc. An IXYS Company 

THE PULSE OF THE FUTURE

SPECIFICATIONS (All specifications measured into a 5Ω load connected with 4 feet (~1.2M) 5Ω cable provided with the PVX-2110)

OUTPUT

Output Voltage Polarity

Maximum Value

Minimum Value

Means Of Adjustment

Maximum Output Current

Pulse Rise And Fall Time

Pulse Width

Pulse Recurrence Frequency

(PRF)

Max. Peak Output Power

Max. Average Output Power

Max. Duty Cycle

Droop (At 50A Output Current)

Over/undershoot

Jitter

Output Connector & Cable

INPUT DC VOLTAGE

Input Voltage Polarity

Maximum Value

Minimum Value

Maximum Input Power

Input DC Connector

Positive Or Negative, Factory Configured

200 Volts

0 Volts

Controlled By Power Supply Input Voltage

50A Peak, 25A Average (1)

<100ns (10% to 90%)

<200ns to 2ms, Controlled by Input Gate

Single shot to 50KHz, Controlled by Input Gate

10,000W (2)

5,000W (3)

50%

<5% @ 1ms pulse width, <10% @ 2ms pulse width

<5%

<10ns shot-to-shot

Type N, With 4 feet (~1.2M) 5Ω Coaxial Cable

Positive Or Negative (User-supplied) (4)

200 Volts

0 Volts

5,000W

Type N, Rear Panel

GATE

Gate Source

+5V ±1V into 50Ω

Input Gate Connector

BNC, Front Panel

VOLTAGE & CURRENT MONITORS

Voltage Monitor

Voltage Monitor Connector

50:1 into 50Ω, accuracy typically within 3% of the

actual output voltage

BNC, Front Panel

Current Monitor

Current Monitor Connector

10A/V into 50Ω, accuracy typically within 3% of the

actual output current

BNC, Front Panel

GENERAL

Support Power

90VAC to 240VAC, 50/60Hz

Dimensions (Excluding Connec- 19” W x 5.2” H x 16” D (48.25cm W x 13.2cm H x

tors)

41cm D)

Weight (Approximate)

18 lbs. (8.2 Kilograms)

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

(1) When driving loads with impedances <5Ω, the output voltage must be limited to <200V,

so that the peak output current (V/R) does not exceed 50A, and the maximum average

current (defined as I x Duty Cycle) does not exceed 25A.

(2) Peak output power is defined as V x I during the output pulse.

(3) Average output power is defined as V x I x Duty Cycle.

(4) Input DC power supply must be the same polarity as the PVX-2110 (i.e. a positive output

PVX-2110 requires a positive high voltage DC input).

200ns Minimum Pulse Width, 200V Output

(100ns/Div horizontal scale, 50V/Div vertical scale)

<50ns Rise Time, 200V Output

(25ns/Div horizontal scale, 50V/Div vertical scale)

Typical Output Waveform, 200V

(10µs/Div horizontal scale, 50V/Div vertical scale)

50KHz, 50% Duty Cycle, 200V Output

(8Ω Load, 10µs/Div horizontal scale, 50V/Div vertical scale)

Doc #9200-0216 Rev 3

© Directed Energy, Inc. 2000

Directed Energy, Inc.

An IXYS Company

2401 Research Blvd., Suite 108

Fort Collins, CO USA 80526

970-493-1901 Fax: 970-493-1903

Email: deiinfo@directedenergy.com

Web: http://www.directedenergy.com

Share Link: