196DLC(2003) 데이터 시트보기 (PDF) - Vishay Semiconductors
부품명
상세내역
제조사
196DLC Datasheet PDF : 6 Pages
| |||
196 DLC
Vishay BCcomponents
Double Layer Capacitors
Table 3
TEST PROCEDURES AND REQUIREMENTS for standard and vertical miniaturized series (5.5 V; 70 °C)
NAME OF TEST
Robustness of
terminations
IEC 60384-4/
EN130 300
subclause
4.4
Resistance to
4.5
soldering heat
Solderability
4.6
Vibration
4.8
Damp heat, steady
4.12
state
Endurance
4.13
Storage at upper
4.17
category temperature
Self discharge
−
Characteristics at high 4.19
and low temperature
PROCEDURE
(quick reference)
tensile strength; application of loading force
for 10 seconds:
20 N (standard series)
5 N (vertical miniaturized series)
solder bath; 260 °C; 5 seconds
solder bath; 235 °C; 2 seconds
10 to 55 Hz; 1.5 mm; 3 directions;
2 hours per direction
500 hours at 55 °C; RH 90 to 95%;
no voltage applied
Tamb = 70 °C; 5.5 V applied;
1000 hours
Tamb = 70 °C;
no voltage applied;
1000 hours
24 hours storage at room temperature after
application of 5 V for 1 hour
step 1: reference measurement
at +20 °C of C, RI and IL
step 2: measurement at −25 °C
step 3: measurement at +20 °C
step 4: measurement at +70 °C
step 5: measurement at +20 °C
REQUIREMENTS
no breaks
∆C/C: ±10%
RI and IL ≤ spec. limit
≥ 75% tinning
∆C/C: ±10%
RI and IL ≤ spec. limit
∆C/C: ±30%
RI ≤ 4 × spec. limit
IL ≤ 2 × spec. limit
∆C/C: ±30%
RI ≤ 4 × spec. limit
IL ≤ 2 × spec. limit
∆C/C: ±30%
RI ≤ 4 × spec. limit
IL ≤ 2 × spec. limit
remaining voltage: ≥ 4 V
∆C/C: ±30% of +20 °C value
RI ≤ 5 × the +20 °C value
IL ≤ 4 × the +20 °C value
www.vishay.com
198
For technical questions contact: aluminumcaps1@vishay.com
Document Number: 28362
Revision: 17-Oct-03
Share Link: 