ATC113 데이터 시트보기 (PDF) - Unspecified

부품명

상세내역

제조사

ATC113

ATC Millimeter Wavelength Single Layer Capacitors

Unspecified 

ATC Single Layer Capacitors: General Specifications

ELECTRICAL CHARACTERISTICS

OPERATING FREQUENCY: Up to 50 GHz.

RESONANT FREQUENCY: See curve below.

STANDARD MEASUREMENT FREQUENCY:

1 MHz for .06 to 100 pF; 1 KHz for values greater than 100 pF.

INSULATION RESISTANCE:

1011 ohms min. at +25°C and rated voltage.

VOLTAGE RATING: 100 WVDC.

Consult factory for higher ratings.

DIELECTRIC TEST VOLTAGE: 250% of voltage rating for

5 seconds. Impervious to static discharge failures.

ENVIRONMENTAL CHARACTERISTICS, cont.

These include the following Hi-Rel tests in accordance with

MIL-STD-202:

• Immersion (method 104, MIL-STD-202)

• Resistance to soldering heat (method 210, MIL-STD-202)

• Low voltage humidity (MIL-C-49464)

• Moisture resistance (method 106)

• Life test at +125°C and 2X rated voltage

(method 108, test cond. F)

• Solderability (method 208)

• Voltage conditioning at +125°C and 2X rated voltage

(method 108, test cond. A)

MECHANICAL CHARACTERISTICS

HERMETICITY: The dielectric is virtually unaffected by moisture

and commonly used cleaning solvents.

RUGGED CONSTRUCTION to minimize bonding problems and

circuit assembly problems.

BOND STRENGTH: All terminations meet or exceed MIL-STD-883

Method 2019 for Die shear strength. Wire bondability meets or

exceeds MIL-C-49464 Paragraph 3.12 as well as MIL-STD-883

Method 2011.

QUALITY PROGRAM

Stringent process procedures and exacting material requirements

ensure that only the highest quality parts are shipped.

ATC's manufacturing and Quality Testing facilities comply with the

following specifications:

• ISO 10012-1 Quality Assurance for Measuring Equipment

• ANSI / NCSL Z540-1-1994 Calibration Laboratories and

Measuring and Test Equipment - General Requirements

ENVIRONMENTAL CHARACTERISTICS

OPERATING TEMPERATURE:

–55°C to +125°C. (No derating of working voltage)

ATC parallel plate capacitors are designed and manufactured to

meet or exceed the requirements of MIL-C-49464.

SERIES RESONANCE VS CAPACITANCE

1000

100

10

1

Typical

0.1

0.1

1

10

100

1000

10000

CAPACITANCE (pF)

2

American Technical Ceramics • One Norden Lane, Huntington Station, N.Y. 11746-2142

phone: 631-622-4700 • fax: 631-622-4748 • e-mail: sales@atceramics.com • http://www.atceramics.com

Share Link: