EN29F512 데이터 시트보기 (PDF) - Eon Silicon Solution Inc.

부품명

상세내역

제조사

EN29F512

512 Kbit (64K x 8-bit) 5V Flash Memory

Eon Silicon Solution Inc. 

EN29F512

The system must write the Erase Resume command (address bits are “don’t care”) to exit the

erase suspend mode and continue the sector erase operation. Further writes of the Resume command

are ignored. Another Erase Suspend command can be written after the device has resumed erasing.

Sector Protection/Unprotection

The hardware sector protection feature disables both program and erase operations in any sector. The

hardware sector unprotection feature re-enables both program and erase operations in previously

protected sectors.

Sector protection/unprotection must be implemented using programming equipment. The procedure re-

quires a high voltage (VID) on address pin A9 and the control pins. Contact Eon Silicon Solution, Inc. for

an additional supplement on this feature.

This Data Sheet may be revised by subsequent versions 10 ©2003 Eon Silicon Solution, Inc., www.essi.com.tw

or modifications due to changes in technical specifications.

Rev. A, Issue Date: 2003/10/20

Share Link: