DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

G6AK-274P-ST40-US 데이터 시트보기 (PDF) - OMRON Corporation

부품명
상세내역
제조사
G6AK-274P-ST40-US
Omron
OMRON Corporation Omron
G6AK-274P-ST40-US Datasheet PDF : 8 Pages
1 2 3 4 5 6 7 8
Characteristics
Type
Non-latching
Latching
Contact resistance (See note 1)
50 mΩ max.
Operate (set) time
(See note 2)
DPDT
5 ms max. (mean value approx. 3 ms)
5 ms max. (mean value approx. 2.50 ms)
Release (reset) time
(See note 2)
DPDT
3 ms max. (mean value approx. 1.20 ms) 5 ms max. (mean value approx. 2.50 ms)
Min. set/reset signal width DPDT
7 ms min.
Operating frequency
Mechanical
36,000 operations/hour
Electrical
1,800 operations/hour (under rated load)
Insulation resistance (See note 3)
1,000 MΩ min. (at 500 VDC); except for set-reset
Dielectric strength
1,000 VAC, 50/60 Hz for 1 minute between coil and contacts
1,000 VAC, 50/60 Hz for 1 minute between contacts of different poles
1,000 VAC, 50/60 Hz for 1 minute between contacts of same pole
250 VAC, 50/60 Hz for 1 minute between set and reset coils
Surge withstand voltage
1,500 V (10 x 160 μs) (conforms to FCC Part 68)
Vibration
Mechanical durability 10 to 55 Hz; 5 mm double amplitude
Malfunction durability 10 to 55 Hz; 3.3 mm double amplitude
Shock
Mechanical durability 1,000 m/s2 (Approx. 100G
Malfunction durability DPDT: 500 m/s2 (Approx. 50 G)
Ambient temperature
-40° to 70°C with no icing
Humidity
5% to 85% RH
Service life
Mechanical
100 million operations min. (at 36,000 operations/hour)
Electrical
500,000 operations min. (at 1,800 operations/hr) See “Characteristic Data”
Weight
DPDT
Approx. 3.5 g
4PDT
Approx. 6.0 g
Note: 1. The contact resistance was measured with 10 mA at 1 VDC with a fall-of-potential method.
2. Values in parentheses are typical values unless otherwise stated.
3. The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those for checking the dielectric strength
(except between the set and reset coil).
4. The above values are initial values.
Approvals
UL Recognized (File No. E41515) / CSA Certified (File No. LR31928) - - Ambient Temp. = 40°C
Type
G6A( )-274P-ST( )-US
Contact form
DPDT
Coil rating
1.5 to 48 VDC
Contact ratings
1 A at 125 VAC (General Purpose)
2 A at 30 VDC (General Purpose)
0.6 A at 110 VDC (General Purpose)
Number of test operations
6,000
Note: 1. The rated values approved by each of the safety standards (e.g., UL and CSA) may be different from the performance characteristics
individually defined in this catalog.
2. In the general interest of product improvement, specifications are subject to change.
70
Low Signal Relay G6A

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]