MAX5064AATC 데이터 시트보기 (PDF) - Maxim Integrated

부품명

상세내역

제조사

MAX5064AATC

125V/2A, High-Speed, Half-Bridge MOSFET Drivers

Maxim Integrated 

19-3502; Rev 5; 5/07

125V/2A, High-Speed,

Half-Bridge MOSFET Drivers

General Description

The MAX5062/MAX5063/MAX5064 high-frequency,

125V half-bridge, n-channel MOSFET drivers drive high-

and low-side MOSFETs in high-voltage applications.

These drivers are independently controlled and their

35ns typical propagation delay, from input to output, are

matched to within 3ns (typ). The high-voltage operation

with very low and matched propagation delay between

drivers, and high source/sink current capabilities in a

thermally enhanced package make these devices suit-

able for the high-power, high-frequency telecom power

converters. The 125V maximum input voltage range pro-

vides plenty of margin over the 100V input transient

requirement of telecom standards. A reliable on-chip

bootstrap diode connected between VDD and BST elimi-

nates the need for an external discrete diode.

The MAX5062A/C and the MAX5063A/C offer both nonin-

verting drivers (see the Selector Guide). The

MAX5062B/D and the MAX5063B/D offer a noninverting

high-side driver and an inverting low-side driver. The

MAX5064A/B offer two inputs per driver that can be

either inverting or noninverting. The MAX5062A/B/C/D

and the MAX5064A feature CMOS (VDD / 2) logic inputs.

The MAX5063A/B/C/D and the MAX5064B feature TTL

logic inputs. The MAX5064A/B include a break-before-

make adjustment input that sets the dead time between

drivers from 16ns to 95ns. The drivers are available in the

industry-standard 8-pin SO footprint and pin configura-

tion, and a thermally enhanced 8-pin SO and 12-pin

(4mm x 4mm) thin QFN packages. All devices operate

over the -40°C to +125°C automotive temperature range.

Features

♦ HIP2100/HIP2101 Pin Compatible (MAX5062A/

MAX5063A)

♦ Up to 125V Input Operation

♦ 8V to 12.6V VDD Input Voltage Range

♦ 2A Peak Source and Sink Current Drive Capability

♦ 35ns Typical Propagation Delay

♦ Guaranteed 8ns Propagation Delay Matching

Between Drivers

♦ Programmable Break-Before-Make Timing

(MAX5064)

♦ Up to 1MHz Combined Switching Frequency while

Driving 100nC Gate Charge (MAX5064)

♦ Available in CMOS (VDD / 2) or TTL Logic-Level

Inputs with Hysteresis

♦ Up to 15V Logic Inputs Independent of Input

Voltage

♦ Low 2.5pF Input Capacitance

♦ Instant Turn-Off of Drivers During Fault or PWM

Start-Stop Synchronization (MAX5064)

♦ Low 200µA Supply Current

♦ Versions Available With Combination of

Noninverting and Inverting Drivers (MAX5062B/D

and MAX5063B/D)

♦ Available in 8-Pin SO, Thermally Enhanced SO,

and 12-Pin Thin QFN Packages

Ordering Information

Applications

Telecom Half-Bridge Power Supplies

Two-Switch Forward Converters

Full-Bridge Converters

Active-Clamp Forward Converters

Power-Supply Modules

Motor Control

PART

TEMP RANGE

PIN-

TOP

PACKAGE MARK

PKG

CODE

MAX5062AASA -40°C to +125°C 8 SO

— S8-5

MAX5062BASA -40°C to +125°C 8 SO

— S8-5

MAX5062CASA -40°C to +125°C 8 SO-EP* — S8E-14

MAX5062DASA -40°C to +125°C 8 SO-EP* — S8E-14

*EP = Exposed paddle.

Devices are available in both leaded and lead-free packaging.

Specify lead-free by replacing “-T” with “+T” when ordering.

Ordering Information continued at end of data sheet.

Selector Guide

PART

HIGH-SIDE DRIVER

MAX5062AASA

Noninverting

MAX5062BASA

Noninverting

MAX5062CASA

Noninverting

MAX5062DASA

Noninverting

Selector Guide continued at end of data sheet.

LOW-SIDE DRIVER

Noninverting

Inverting

Noninverting

Inverting

LOGIC LEVELS

CMOS (VDD / 2)

CMOS (VDD / 2)

CMOS (VDD / 2)

CMOS (VDD / 2)

PIN COMPATIBLE

HIP 2100IB

—

—

—

________________________________________________________________ Maxim Integrated Products 1

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at

1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

Share Link: