MBF9041BB 데이터 시트보기 (PDF) - Oki Electric Industry

부품명

상세내역

제조사

MBF9041BB

SAW Antenna Duplexer (700 to 1000 MHz)

Oki Electric Industry 

OKI Semiconductor

FEDW9041BB-02

MBF9041BB

RECOMMENDATION FOR SOLDER PAD PATTERN

The solder pad pattern should be designed by customers because it depends on the electrical

performance of the customers’ system. Following is an example of solder pad pattern which is used in

OKI’s package evaluation board. Please be noted that this is for reference purpose only.

25 µm

0.1 mm

25 µm

0.5 mm

0.1 mm

0.1 mm

PCB pad pattern

Metal mask pattern

Pad of Device

Please pay attention to the following items to maintain electrical performance.

(1) Metal mask pattern for cream solder should be 25 µm smaller on each side. Metal mask is 0.15 mm in

thickness.

(2) As the impedance of Tx, Rx, ANT is designed for 50 Ω, please consider this for the design of mother board.

(3) The performance of these devices is assured when GND pad (Pin 17) is connected. GND pad (Pin 17) should

be soldered in the same way as above.

9/11

Share Link: