DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MC44BS373CAEF 데이터 시트보기 (PDF) - Freescale Semiconductor

부품명
상세내역
제조사
MC44BS373CAEF Datasheet PDF : 52 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Features
1 Features
The MC44BS373CA is a multi-standard, PAL/SECAM/NTSC modulator.
The channel is set by an on-chip high-speed I2C-compatible bus receiver. A phase-locked loop (PLL) tunes
the modulator over the full UHF range.
The modulator incorporates a sound subcarrier oscillator and uses a second PLL to derive 4.5-, 5.5-, 6.0-,
and 6.5-MHz subcarrier frequencies. These frequencies are selectable by bus.
The modulation standard can be chosen using a control bit that selects between positive and negative
modulation.
The picture-to-sound ratio may be adjusted using the bus. In addition, an on-chip video test pattern generator
can be switched on with a 1-kHz audio test signal.
The MC44BS373CA also has the following features:
• Integrated on-chip programmable UHF oscillator
• No external varicaps diodes/inductor or tuned components
• Extremely low external component count
• Channel 21–69 UHF operation
• VHF range possible by internal dividers (30–450 MHz)
• Boosted TVOUT level (82 dBµV typical)
• High-speed read and write I2C bus compatible (800 kHz)
• I2C address selectable by pin (four choices) using external resistor (available only in QFN20
package)
• I2C bus 5- and 3.3-V compatible
• Fixed video modulation depth (93% typical in system L and 82% typical in the other standards)
• Peak white clip disabled by bus
• Programmable picture/sound carrier ratio (12 and 16 dB)
• Integrated on-chip programmable sound subcarrier oscillator (4.5, 5.5, 6.0 and 6.5 MHz)—no
external varicaps
• Programmable sound reference frequency (31.25 and 62.5 kHz)
• Direct RF sound modulator input (FM and AM modulator bypassed) for NICAM or stereo sound
applications (available only in QFN20 package)
• On-chip video test pattern generator with sound test signal (1 kHz)
• Low-power programmable modulator standby mode
• Transient output inhibit during PLL lock-up at power-on
• Logical output port controlled by bus
• ESD protection, minimum 4 KV
2 Comparing the MC44BS373CA to the MC44BC373/4C
Compared to the MC44BC373/4C devices, the MC44BS373CA has the following improvements:
• Higher output level (82 versus 74.5 dBµV)
• Higher video signal to noise (+3 dB)
MC44BS373CA Data Sheet

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]