APL5155 데이터 시트보기 (PDF) - Anpec Electronics
부품명
상세내역
제조사
APL5155 Datasheet PDF : 20 Pages
| |||
APL5155
Ordering and Marking Information
APL5155
APL5155 B :
APL5155 33B :
APL5155 50B :
APL5155 D :
APL5155 KA :
L55X
55RX
55ZX
APL5155
XXXXX
APL5155
XXXXX
Assembly Material
Handling Code
Temperature Range
Package Code
Voltage Code
Package Code
B : SOT-23-5 D : SOT-89 KA : SOP-8P
Operating Ambient Temperature Range
I : -40 to 85 oC
Handling Code
TR : Tape & Reel
Voltage Code
33 : 3.3V 50 : 5.0V Blank : Adjustable Version
Assembly Material
G : Halogen and Lead Free Device
X - Date Code
X - Date Code ; R - 3.3V
X - Date Code ; Z - 5.0V
XXXXX - Date Code
XXXXX - Date Code
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020D for
MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
Absolute Maximum Ratings (Note 1)
Symbol
Parameter
Rating
Unit
VIN, VEN
VIN, EN to GND Voltage
- 0.3 to 27
V
VOUT, VADJ
TJ
TSTG
TSDR
VOUT, ADJ to GND Voltage
Maximum Junction Temperature
Storage Temperature
Maximum Lead Soldering Temperature, 10 Seconds
- 0.3 to 27
V
150
oC
-65 to 150
oC
260
oC
Note1: Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are
stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recom-
mended operating conditions" is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device
reliability.
Thermal Characteristics
Symbol
Parameter
Typical Value
Thermal Resistance-Junction to Ambient (Note 2)
θJA
SOT-23-5
235
SOT-89
180
SOP-8P
50
Thermal Resistance-Junction to Ambient (Note 2)
θJC
SOT-23-5
130
SOT-89
38
SOP-8P
20
Note 2: θJA is measured with the component mounted on a high effective thermal conductivity test board in free air.
Unit
oC/W
oC/W
Copyright © ANPEC Electronics Corp.
2
Rev. A.3 - Sep., 2012
www.anpec.com.tw
Share Link: 