IEC61000-4-5 데이터 시트보기 (PDF) - Unspecified

부품명

상세내역

제조사

IEC61000-4-5

Panel Mount Power Supply 5V 35W 1Phase

Unspecified 

Panel Mount Power Supply 5V 35W 1Phase

ENVIRONMENT

Ambient temperature (Operating)

Operating Humidity

Ambient temperature (Storage)

Altitude (Operating)

Shock Test

Vibration (Non-Operating)

Bump

MTBF

Expected Cap Life Time

Material and Parts

Degree of protection

Class of protection

Pollution degree

-10°C to +50°C, with operation to 70°C possible with a linear

derating to half power from 50°C to 70°C.

< 95%RH

-25°C to 85°C

3,000 Meters

IEC60068-2-27, 30G (300m/s2)

IEC60068-2-6, 10Hz to 150Hz @ 50m/s2 (5G peak) for all X,

Y, Z direction

IEC60068-2-29, 11ms/ 10gn

> 700,000 hrs, as per BELL CORE STD or IEC61709

Tested at 115Vac & 230Vac input, 100% load, 25°C ambient

10 years (115Vac & 230Vac, 50% load and 40°C ambient).

RoHS directive, WEEE directive

IPX0

Class I with PE connection

2

Inrush Current

Inrush Current is the first surge current seen on the

input side when AC input is applied to the power

supply. It is the first pulse captured; see a typical

picture for the inrush current as seen in the power

supply.

Start Up Time

Start up time is measured from the point AC input is

applied and the o/p voltage reaches within 90% of its

set value. See picture below for a typical start up time

characteristic of a power supply.

Rise Time

Rise time is the time needed for o/p voltage to rise

from 10% of its set value to 90% of its set value. See

the picture below for a typical rise time measurement

in a power supply.

Hold Up Time

Hold-up time is the duration which output voltage

retains regulation while AC input collapses. Picture

below is a typical hold-up time characteristic.

Output Voltage Adjust

The 5 VDC connection is made using the "+" and "–" screw

connections. At the time of delivery, the output voltage is 5

V DC. The output voltage can be set from 4.75 to 5.5 VDC

on the potentiometer seen as Adjust on the front panel of

each power supply.

Dynamic Load

The Power Supply is capable of dynamic output

voltage load change from 2% to 100% within +/-5%

regulation limits. See picture below on the dynamic

behavior the Power Supply.

www.DeltaPSU.com

7

Share Link: