DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

IQ12-QTC 데이터 시트보기 (PDF) - SynQor Worldwide Headquarters

부품명
상세내역
제조사
IQ12-QTC
SYNQOR
SynQor Worldwide Headquarters SYNQOR
IQ12-QTC Datasheet PDF : 28 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Technical
Specification
IQ12-QTC Family
MECHANICAL DIAGRAM
Top View
0.600 (15.24)
1.54 (39)
0.450 (11.43)
0.300 (7.62)
0.25
(6.4)
0.150 (3.81)
0.26
(6.7)
87654
Side View
0.500 ± 0.025
(12.7 ± 0.63)
Overall Height
0.18
(4.57)
2.39
(60.6)
2.00
(50.8)
1.86
(47.21)
0.18
(4.6)
0.47
(11.9)
1
2
3
M3 Threaded
Inserts
4 Places
See Note 9
0.600 (15.24)
1.030 (26.16)
0.300 (7.62)
0.010 ± 0.010
(0.25 ± 0.25)
Bottom Side Clearance
NOTES
1) Pins 1-3, 5-7 are 0.040" (1.02mm) diameter with 0.080" (2.03
mm) diameter standoff shoulders.
2) Pins 4 and 8 are 0.062" (1.57 mm) diameter with 0.100" (2.54
mm) diameter standoff shoulders.
3) Recommended pin length is 0.03" (0.76mm) greater than the PCB
thickness.
4) All Pins: Material - Copper Alloy; Finish - Matte Tin over Nickel
plate
5) Undimensioned components shown are for visual reference only.
6) Weight: 3.02 oz. (85.7 g) typical
7) All dimensions in inches (mm)
Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm)
x.xxx +/-0.010 in. (x.xx +/-0.25mm)
8) Workmanship: Meets or exceeds current IPC-A-610 Class II
9) M3 screws used to bolt unit’s baseplate to other surfaces (such as
a heatsink) must not exceed 0.100" (2.54 mm) depth below the
surface of the baseplate.
10) Applied torque per screw should not exceed 6in-lb. (0.7 Nm).
11) Baseplate flatness tolerance is 0.004" (.10mm) TIR for surface.
PIN DESIGNATIONS
Pin
No.
Name Function
1
Vin (+) Positive input voltage
TTL input to turn converter
2
ON/OFF on and off, referenced to
Vin (-) with internal pull up
3
Vin (-) Negative input voltage
4
Vout (-) Negative output voltage
5
SENSE (-) Negative remote sense1
6
TRIM Output voltage trim2
7 SENSE (+) Positive remote sense3
8
Vout (+) Positive output voltage
Notes:
1. SENSE(–) should be connected to Vout(–) either remotely or at the
converter.
2. Leave TRIM pin open for nominal output voltage.
3. SENSE(+) should be connected to Vout(+) either remotely or at the
converter.
Product # IQ12xxxQTCxx
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-IQ12QTX Rev. B
09/23/08
Page 2

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]