M52342FP 데이터 시트보기 (PDF) - MITSUBISHI ELECTRIC

부품명

상세내역

제조사

M52342FP

PLL-SPLIT VIF/SIF IC

MITSUBISHI ELECTRIC  

Pin 1 (RF AGC DELAY)

VCC

1

MITSUBISHI ICs (TV)

M52342FP

PLL-SPLIT VIF/SIF IC

An applied voltage to the pin1 is for changing a RF AGC delay point.

Pin 2 (AFT OUTPUT)

The maximum

outflow current

is 0.2 mA.

The maximum

inflow current

is 0.2mA.

VCC (supply to a tuner)

2

Tuner

Since an AFT output is provided by a high impedance source, the detection

sensitivity can be set by an external resistor.

The muting operation will be on in following two cases;

1) the APC is out of locking,

2) the video output becomes small enough in a weak

electric field.

Vcc

[V2]

Vcc

2

(in open-loop condition)

0

[fo]

Pin 3 (RF AGC OUTPUT)

A current mode output is available in the reverse AGC operation.

The fluctuation of a bottom voltage is made small by loading higher impedance for

a deep saturation.

The maximum

inflow current

is 1.5mA.

VCC (supply to a tuner)

3

Tuner

VCC

(supply voltage to a tuner)

(in open-loop condition)

[V3]

weak

electric field

0

[IF input]

strong

electric field

Note: Connecting a nonpolarity capacitor of 1µF between pin1 and pin 3 improves AGC operating speed.

In that case, the capacitors between pin1/pin3 and ground should be removed.

8

Share Link: