M52348FP 데이터 시트보기 (PDF) - MITSUBISHI ELECTRIC

부품명

상세내역

제조사

M52348FP

WIDE FREQUENCY BAND ANALOG SWITCH

MITSUBISHI ELECTRIC  

MITSUBISHI ICs (Monitor)

M52348FP

WIDE FREQUENCY BAND ANALOG SWITCH

Vsth1 Switching threshold voltage 1

Vsth2 Switching threshold voltage 2

1. The conditions shall be as provided in the Electrical

Characteristics Table. Input SG7 into pins 2 , 5 and 7 . Input

SG7 into pins 8 and 9 . Do not input signal into other pins.

2. Apply a voltage of 0V to pin 19 and check each of TP21, TP22,

TP25, TP27, TP30 and TP35 for output of signal.

3. Gradually increasing the voltage at pin 19 , specify the output at

pin 19 to be Vsth1 when the signal is not output from the above

pins.

4. As in the same manner, input SG1 into pins 11 , 13 and 16 and

input SG7 into pins 17 and 18 . Do not input signal into other

pins.

5. Apply a voltage of 5V to pin 19 and check each of TP21, TP22,

TP25, TP27, TP30 and TP35 for output of signal.

6. Gradually decreasing the voltage at pin 19 , specify the output at

pin 19 to be Vsth2 when the signal is not output from the above

pins.

TYPICAL CHARACTERISTICS

THERMAL DERATING (MAXIMUM RATING)

1250

1068

1000

750

500

250

-20 0

25 50 75 85 100 125 150

AMBIENT TEMPERATURE Ta (˚C)

INPUT SIGNAL

SG No.

signals

Sine wave (f=60 kHz, 0.7VP-P, amplitude variable)

SG1

0.7VP-P

(Amplitude variable)

SG2

SG3

SG4

SG5

Sine wave (f=1 MHz, amplitude 0.7VP-P)

Sine wave (f=10 MHz, amplitude 0.7VP-P)

Sine wave (f=100 MHz, amplitude 0.7VP-P)

Sine wave (f=250 MHz, amplitude 0.7VP-P)

Pulse of 0.7VP-P in amplitude

(f=60kHz, duty 80%)

SG6

0.7VP-P

Square wave

(Amplitude 5.0 VO-P TTL, f=60 kHz, duty = 50%)

SG7

5V

0V

6

Share Link: